Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Further information

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

7. Used for accessory components.

Removal

Remove the marked part.

Remove the marked part.

Disconnect any connector(s).

Tightening torque: Safety belt lower anchor to body (rear) , 40 Nm

Loosen the marked detail.

Repeat on the other side.

Remove the marked part.

Repeat on the other side.

Remove the panel.

Repeat on the other side.

Remove the marked detail/details.

Remove the marked part.

Remove the panel.

Disconnect the connector, if applicable.

Remove the weatherstrip.

Remove the marked part.

Repeat on the other side.

Remove the screws.

Tightening torque: Front seat to body , 40 Nm

Remove the screws.

Tightening torque: Front seat to body , 40 Nm

Remove the battery's negative cable.

Alternative 1

Alternative 2

All vehicles

Loosen the screws.

Disconnect the connector.

Disconnect the connector, if applicable.

Remove the screws.

Loosen the marked detail.

Vehicles with High Performance Sound

Disconnect the connector.

Vehicles with Premium Sound

Disconnect the connector.

All vehicles

Accessory installation

Loosen the tape temporarily.

The item is to be reused.

Use special tool: T9512620, Stripping tool (for wiring)

Use detail according to image.

Use special tool: T9512620, Stripping tool (for wiring)

Use special tool: T9512785, Crimping tool (included in 9512669)

Use special tool: T9512777, Hot-air gun

Connect the connectors.

Fold the carpet aside.

Remove the screw.

Connect the ground cable.

Reinstall the screw.

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

Fold the floor carpet back.

Place the overlap of the cable mat under the amplifier.

Reinstall the removed part.

Reinstall the screws.

Tightening torque: M6 , 10 Nm

Assemble components that come with the accessory kit.

Install component that comes with the accessory kit.

Install component that comes with the accessory kit.

Connect the connectors.

Disconnect the connectors.

Remove the screw.

Remove the marked part.

Use details according to image.

Assemble components that come with the accessory kit.

Depress the secondary lock.

Install component that comes with the accessory kit.

Install the screw.

Tightening torque: M6 , 10 Nm

Connect the connectors.

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

Fold the insulation aside.

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

Position the cable harness excess as illustrated.

Install the wiring harness.

Use tape

Reinstall the removed parts in reverse order.

Reinstall the battery's negative cable.

Order and download software according to VIDA/SOFTWARE.

Order and download software according to: 30786292

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31266811