2017 L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2017
XC60 (-17) 2017 L.H.D

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313990991.131339994, 9487189
Parking assistance camera wide angle front




IMG-374543




Special tools

 

999 7482 Cutting tool

Tool number:999 7482

Tool description:Cutting tool

Tool boards:30


Materials

Designation

Part number

Low temperature grease

1161427


Equipment
IMG-242205
A0000162
IMG-239664
IMG-300203
IMG-327738
IMG-239667

IMG-380917


 
  
36686-2

Parking assistance, camera, wide angle front

Equipment

Designation

Expander pliers

Angle drill machine


 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
IMG-332179
 

Set the ignition key to position 0.

Remove the battery's negative cable.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-345728
 

Remove the panel.

5
IMG-345734
 

Disconnect the connector.

6
IMG-345736
 

Release the catches.

7
IMG-345737
 

Remove the panel.

8
IMG-345744
 

Remove the screws.

9
IMG-345745
 

Remove the screws.

10
IMG-340598
 

Remove the panel.

11
IMG-345746
 

Remove the panel.

12
IMG-340599
 

  1. Fold the carpet aside.

  2. Remove the cable harness clips.

  3. Disconnect the connector.

13
IMG-340600
 

Remove the panel.

 

Vehicles with the 4C system.

14
IMG-340601
 

Disconnect the connector.

 

All vehicles

15
IMG-340602
 

Use tape

16
IMG-375923
 
17
IMG-293010
 
18
IMG-375925
 
19
IMG-340604
 
20
IMG-340605
 

Remove the screws.

21
IMG-340607
 
22
IMG-380815
 
 

Accessory installation

23
IMG-380819
 
24
IMG-380816
 
 

Removal

25
IMG-345767
 

Remove the screws.

26
IMG-345766
 
27
IMG-380933
 

Disconnect the connectors.

28
IMG-341780
 
29
IMG-341781
 
30
IMG-341782
 

Remove the screws.


Tightening torque: M8 , 24 Nm

31
IMG-341773
 
32
IMG-374438
 

Remove the screws.

33
IMG-374497
 

Detach the panel.

34
IMG-374495
 

Disconnect the connector.

 

Accessory installation

35
IMG-374547
 

Install component that comes with the accessory kit.

36
IMG-362040
 

Locate the existing connector in the vehicle's cable harness.

Connect the connector.

37
IMG-374510
 

Tear off the excess foam tape.

Clamp the cables and connectors to the existing cables to prevent noise.

38
IMG-345849
 
39
IMG-345850
 
40
IMG-345851
 
41
IMG-380971
 
42
IMG-380972
 
43
IMG-345858
 
44
IMG-345859
 
45
IMG-307603
 

Locate the rubber grommet under the insulation and press it out.

46
IMG-345860
 

Pull the wiring through.

47
IMG-380941
 

Connect the prerouted cable.

48
IMG-380943
 

Connect the connectors.

49
IMG-345862
 
50
IMG-345767
 

Reinstall the screws.

51
 

Reinstall the removed parts in reverse order.

 

Removal

52
IMG-345865
 
53
IMG-345866
 

Use tape

54
IMG-345867
 
55
IMG-345871
 
56
IMG-345872
 
57
IMG-345873
 

Remove the part carefully

58
IMG-345874
 
59
IMG-345875
 
60
IMG-345876
 
61
IMG-307687
 
62
IMG-307688
 
63
IMG-345877
 

  1. Remove the clips.

  2. Remove the screws.

64
IMG-345878
 
65
IMG-345879
 

Locate the rubber grommet under the insulating mat.

66
IMG-345880
 

Pull the wiring through.

67
IMG-345881
 
68
IMG-345882
 

Use: Expander pliers

Use: 1161427, Low temperature grease

69
IMG-345883
 
70
IMG-273585
 
71
IMG-340533
 

Remove the nuts.

72
IMG-340606
 
73
IMG-345884
 
74
IMG-345885
 

Caution!
Make sure to locate the wiring in such a way that any damage caused by heat or excessive wear is avoided.


Note!
Do not yet tighten the clamps.

Route the ground wire next to the existing wiring harness.

75
IMG-345886
 
76
IMG-345887
 

Route the cable harness to the existing cable harness.

77
IMG-345888
 
78
IMG-345889
 
79
IMG-345890
 

Caution!
Tighten clamps properly.

80
IMG-347781
 
81
IMG-347786
 
82
IMG-375872
 

Note!
Orientation view


Note!
This step is easier with two people.

83
IMG-375871
 

Use: Angle drill machine


Use special tool: T9997482, Cutting tool

84
IMG-375843
 

Use: Angle drill machine


Use special tool: T9997482, Cutting tool

85
IMG-375883
 
86
IMG-347781
 
87
IMG-347786
 
88
IMG-374396
 
89
IMG-374391
 
90
IMG-375891
 

Connect the connector.

91
IMG-375895
 
92
IMG-340544
 

Caution!
Tighten clamps properly.

Insert the cable in to the passenger compartment, adjust the cable length out into the engine compartment and secure the rubber grommet.

Reinstall the removed parts in reverse order.

93
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31285245

© Volvo Car CorporationParking assistance camera wide angle front- 31399099 - V1.1
volvocars.com
Lifestyle Collection
Find a Dealer
Myanmar

Cookies Legal Disclaimer Privacy Policy Copyright

Copyright © 2024 Volvo Cars. All rights reserved.