Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V70 2008
V70 (08-) 2008 Europe

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314287831.031373840, 31373184, 31346554, 31414859, 31407107
Towbar, wiring, and control module




 

Special tools

 

951 2932 Tension spring

Tool number:951 2932

Tool description:Tension spring

Tool boards:80


Materials

Designation

Part number

Isopropanol

1161721


Equipment
IMG-242205
IMG-345497
IMG-332314
IMG-239664

IMG-384504


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

When installing, the car must retain a temperature of 20 degrees C.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

4
IMG-245980
 

Set the ignition key to position 0.

 

Removal

5
IMG-264423
 
6
IMG-264424
 
7
IMG-361641
 

Remove the part carefully

8
IMG-268004
 
9
IMG-268005
 
 

Accessory installation

10
IMG-356021
 
11
IMG-356033
 


Tightening torque: M5 , 5 Nm

12
IMG-264524
 
13
IMG-264525
 
14
IMG-361518
 

Ground connection


Tightening torque: M6 , 10 Nm

15
IMG-265733
 

Detach the panel.

 

Alternative 1

16
IMG-384843
 

Note!
Orientation view

 

Alternative 2

17
IMG-384844
 

Note!
Orientation view

 

Alternative 1

18
IMG-264443
 
19
IMG-264444
 
20
IMG-360395
 

Route the cable harness to the existing cable harness.

21
IMG-360376
 


Use special tool: T9512932, Tension spring

Use tape

Pull the wiring through.

22
IMG-360381
 

Caution!
Ensure that the wire or wiring harness cannot rub against adjacent components.

Route the cable harness to the existing cable harness.

23
IMG-340349
 

Release the lock.

24
IMG-372406
 

Use: Interior trim remover

25
IMG-360386
 
26
IMG-264451
 
27
IMG-385161
 
 

Alternative 2

28
IMG-384844
 

Note!
Orientation view

29
IMG-338941
 
30
IMG-338943
 
31
IMG-361516
 

Route the cable harness to the existing cable harness.

32
IMG-360396
 


Use special tool: T9512932, Tension spring

Use tape

Pull the wiring through.

33
IMG-361514
 

Caution!
Ensure that the wire or wiring harness cannot rub against adjacent components.

34
IMG-340349
 

Release the lock.

35
IMG-372406
 

Use: Interior trim remover

36
IMG-372409
 

Connect the prerouted cable.

37
IMG-360399
 

Install the catch.

38
IMG-338948
 
39
IMG-384689
 
 

All vehicles

40
IMG-361501
 

Note!
Orientation view

41
IMG-360217
 

Note!
Note the position.

Use: 1161721, Isopropanol

Wipe dry.

42
IMG-360218
 

Use: 1161721, Isopropanol

Wipe dry.

43
IMG-356181
 
44
IMG-360227
 

Remove the protective film.

45
IMG-384588
 

Note!
Note the position.

When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

46
IMG-360226
 

Fold the insulation to one side.

47
IMG-360221
 

Locate the pre-routed connectors.

48
IMG-384634
 

Connect the cable harness.

49
IMG-384757
 

Route the cable harness to the existing cable harness.

Attach any excess wire to the wiring harness.

50
IMG-384534
 

Note!
Make sure to follow the sequence indicated.

Connect the connectors.

51
IMG-384589
 

Remove the protective film.

52
IMG-384559
 

Caution!
Ensure that the wire or wiring harness cannot rub against adjacent components.


Note!
Note the position.

Place the component where indicated in the graphic.

53
IMG-385298
 

Note!
Note the position.

Place the component where indicated in the graphic.

54
IMG-338941
 
55
IMG-384607
 
 

Installation

56
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 30744326

 

Check

57
IMG-348017
 

Note!
To activate the trailer module (TRM) at least two light sources (lamps) must be connected. This can be done by connecting test equipment for the trailer connector, or a trailer.


Note!
The trailer module (TRM) must be programmed with correct software to function correctly.

  1. Left indicator lamp

  2. Fog tail lamps.

  3. Ground connection

  4. Right indicator lamp

  5. Right position lamp

  6. Brake light

  7. Left position lamp

  8. Back-up lamp

  9. Battery voltage, constant

  10. Battery voltage, ignition on

  11. Ground connection

  12. Not connected

  13. Ground connection

 

Installation

58
 

Reinstall the removed parts in reverse order.