2017 L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2017
XC60 (-17) 2017

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313164391.031659506, 30758116, 31373593, 31399365
Mirror, cover




IMG-299403




Equipment
A0000162
IMG-336981

IMG-336982


 
  

INTRODUCTION

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 
1
IMG-245980
 

Applies to all models

  • Turn the ignition key to position 0.


Note!

Wait at least three minutes before unplugging the connectors or removing other electrical equipment.


2
IMG-334091
 

Applies to the XC60

  • Carefully push the mirror glass out using the wedge shaped special tool part no. 9997390.

  • Remove the cover. New cover is included in the kit.

3
IMG-228990
 

  • Disconnect the cables.

4A
IMG-299503
4B
IMG-299504
4C
IMG-299505
 

A, B, and C

  • Carefully pry off the catches and remove the cover. It will not be reused.

  • Repeat on the car's other side.

5A
IMG-299505
5B
IMG-336988
 

Illustrations A and B

  • Install the new panel from the kit.

6
IMG-228990
 

  • Connect the cables.

7
IMG-336989
 

  • Carefully press the mirror glass into place.

  • Repeat for the other side.

8
IMG-299423
 

Applies to C30/C70 (06-)/S40 (04-)/V50/V70 (08-)/ XC70 (08-)/XC90

  • Carefully pry off the mirror glass.

9
IMG-299443
 

  • Press out the mirror's cover using a small screwdriver.

  • Remove the cover. New cover is included in the kit.

10
IMG-299444
 

  • Make sure that the damper blades end up in their grooves.

  • Carefully press the mirror glass into place.

11A
IMG-299445
11B
IMG-299446
11C
IMG-299447
 

Illustrations A, B and C

  • Press the new cover on the mirror. Press all the way around so that all catches engage.