Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC90 2017
XC90 (16-) 2017

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314142401.631428005, 31428890, 31428891
Decor frame




IMG-382189




 
Equipment
IMG-345497
IMG-239667
IMG-239980
IMG-239664

IMG-382191


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-382528
 

Open the hood.

4
IMG-382200
 

Remove the weatherstrip.

5
IMG-398087
 

Remove the clips.

Repeat on the other side.

6
IMG-382201
 

Remove the clips.

7
IMG-392958
 

Remove the screws.

Remove the clip.

8
IMG-393125
 

Fold marked part aside.

9
IMG-387143
 

Remove the clips.

10
IMG-382209
 

Remove the screws.

Remove the marked part.

Repeat on the other side.

11
IMG-382210
 

Remove the screws.

Remove the clips.

Repeat on the other side.

12
IMG-382280
 

Remove the nut.

Repeat on the other side.

13
IMG-382211
 

Fold the wing liner aside.

Repeat on the other side.

14
IMG-382279
 

Note!
Orientation view

15
IMG-398082
 

Fold marked part aside.

Repeat on the other side.

16
IMG-398324
 

Caution!
Make sure not to damage painted surfaces.

Use tape

Repeat on the other side.

 

Vehicles with headlamp washers

17
IMG-396579
 
 

All vehicles

18
IMG-404480
 

Caution!
The number of connectors can vary depending on the vehicle's equipment level.

Disconnect the connectors.

 

Vehicles early version

19
IMG-382216
 

Remove the screws.

Repeat on the other side.


Tightening torque: Bracket to front fender , 6 Nm

 

Vehicles late version

20
IMG-412857
 

Remove the screws.

Repeat on the other side.


Tightening torque: Bracket to front fender , 6 Nm

 

All vehicles

21
IMG-386979
 

Repeat on the other side.

22
IMG-387146
 

Caution!
Place the Bumper Cover on a suitable surface.

Request the aid of a colleague for this procedure.

Remove the marked part.

23
IMG-397770
 

Remove the cable harness clips.

Fold marked part aside.

24
IMG-397787
 

Loosen the clips.

Remove the marked part.

 

Vehicles with parking assistance

25
IMG-403195
 

Remove the part carefully

Repeat on the other side.

 

Alternative 1

26
IMG-382227
 

Remove the marked part.

Repeat on the other side.

27
IMG-386127
 

The part is not to be reused.

Repeat on the other side.

 

Accessory installation

 

Alternative 1

28
IMG-398205
 

Repeat on the other side.

 

Alternative 2

29
IMG-397845
 

Repeat on the other side.

 

Vehicles without parking assistance

30
IMG-401042
 

Install component that comes with the accessory kit.

Repeat on the other side.

 

Accessories marked with date before 25/05/2015

31
IMG-403138
 

Caution!
Cut carefully to avoid unintentional damage or personal injury.


Note!
Use a sharp knife.

Remove the marked part.

Repeat on the other side.

32
IMG-403139
 

Caution!
Cut carefully to avoid unintentional damage or personal injury.


Note!
Use a sharp knife.

Remove the marked part.

Repeat on the other side.

 

All vehicles

33
IMG-382230
 

Install component that comes with the accessory kit.

Repeat on the other side.

34
IMG-382282
 

Install the catch.

Repeat on the other side.

 

Vehicles with parking assistance

35
IMG-403196
 

Reinstall the removed part.

Repeat on the other side.

 

All vehicles

36
IMG-377070
 

Reinstall the removed parts in reverse order.

37
IMG-400996
 

Note!
Adjust the position of the components to create even spaces.

Press until a click is heard.

Repeat on the other side.

38
IMG-370207
 


Tightening torque: Aluminum wheel rim to wheel hub
Stage 1: 4 Nm
Stage 2: 50 Nm
Stage 3: 140 Nm