2017 L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S90 2017
S90 (17-) 2017

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314542921.539843535, 39843537, 39843539, 39843541, 39843543, 39843547, 39843549, 39843551, 39843553, 39843555, 39843557, 39843559, 39843561, 39843563, 39843565, 39843567
Spoiler, boot lid




Materials

Designation

Part number

Isopropanol

Glue

8750060


Equipment
IMG-345497
IMG-332314
IMG-336909

IMG-410070


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
IMG-360922
 

Note!
Make sure that the customer is advised not to wash the vehicle within the next 72 hours.


Note!
Make sure that the mating faces are at a minimum temperature of 20°C.


Note!
Make sure that the spring is placed correctly to ensure the opening of the trunk lid.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Applies to unpainted component

4
IMG-410287
 
 

Preparation

5
IMG-410075
 

Clean the surface.

6
IMG-410096
 

Wipe dry.

7
IMG-410097
 

Use: , Isopropanol

Allow to dry.

 

Removal

8
IMG-410210
 
9
IMG-410550
 

Remove the marked part.

10
IMG-418065
 

Fold marked part aside.

11
IMG-418066
 

Loosen the marked detail.

12
 

Repeat the steps when removing on opposite side.

 

Installation

13
IMG-440518
 

Note!
Make sure that the spring is placed according to image.

Place the component where indicated in the graphic.

Repeat on the other side.

14
 

To install, reverse the removal procedure.

 

Accessory installation

15
IMG-410100
 

Wipe off

16
IMG-410115
 

Note!
Make sure that the component is centred.

Place the component where indicated in the graphic.

17
IMG-410652
 

Note!
This step requires the aid of another technician.

  1. Use tape

  2. Mark using a pen

18
IMG-410131
 

Fold the protective film forward

Repeat on the other side.

19
IMG-410130
 

Fold the protective film forward

20
IMG-411869
 

Caution!
Cut carefully to avoid unintentional damage or personal injury.

Cut the component following the instructions in the graphic.

21
IMG-410683
 

Apply the stated Material on the marked surface.

Use: 8750060, Glue

22
IMG-415796
 

Apply the stated Material on the marked surface.

Repeat on the other side.

Use: 8750060, Glue

23
IMG-410140
 

Note!
Note the position.

Install component that comes with the accessory kit.

24
IMG-410790
 

Note!
This step requires the aid of another technician.

Measure

25
IMG-410724
 

Caution!
Pull carefully.


Note!
This step requires the aid of another technician.

Remove the protective film.

26
IMG-410726
 

Caution!
Pull carefully.

Remove the protective film.

27
IMG-410728
 

Caution!
Pull carefully.

Remove the protective film.

Repeat on the other side.

28
IMG-410155
 

Note!
Press and apply pressure to the part over the tape for at least 20 seconds.


Note!
Ensure that the tape is fixed to the surface.

29
IMG-410735
 

Note!
Press and apply pressure to the part over the tape for at least 20 seconds.


Note!
Ensure that the tape is fixed to the surface.

Repeat on the other side.

30
IMG-410746
 

Remove the tape.

31
IMG-410165
 

Clean the surfaces.

© Volvo Car CorporationSpoiler, boot lid- 31454292 - V1.5
volvocars.com
Lifestyle Collection
Find a Dealer
Kuwait

Cookies Legal Disclaimer Privacy Policy Copyright

Copyright © 2024 Volvo Cars. All rights reserved.