Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S60 2018
S60 (11-18) 2018 L.H.D

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313990911.031339994
Parking assistance, camera, front. For Sensus Connect.




IMG-374543




 

Special tools

 

951 2932 Tension spring

Tool number:951 2932

Tool description:Tension spring

Tool boards:80

 

999 7482 Cutting tool

Tool number:999 7482

Tool description:Cutting tool

Tool boards:30


Materials

Designation

Part number

Low temperature grease

1161427


Equipment
IMG-242205
IMG-345497
IMG-300203
IMG-239667
IMG-244945
IMG-240675

IMG-380917


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
IMG-332179
 

Set the ignition key to position 0.

Remove the battery's negative cable.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-292804
 

Remove the panel.

5
IMG-292826
 

Remove the panel.

6
IMG-346036
 

Remove the panel.

7
IMG-345113
 

Carefully pry loose the bottom edge of the panel and then continue around the panel.

8
IMG-340590
 

Disconnect the connector.

9
IMG-340985
 

Remove the screws.

10
IMG-340987
 

Remove the screws.

11
IMG-292806
 

Fold the carpet to the side.

12
IMG-292823
 

Remove the cable harness clips.

Disconnect the connector.

 

Vehicles with the 4C system.

13
IMG-292827
 

Disconnect the connector.

 

Cars with automatic transmissions

14
IMG-293006
 
15
IMG-293007
 

Release the shift-lock function.

 

All vehicles

16
IMG-340981
 
17
IMG-340604
 

Disconnect the connector.

18
IMG-340605
 

Remove the screws.

19
IMG-340607
 
20
IMG-380815
 
 

Accessory installation

21
IMG-380819
 
22
IMG-380816
 
 

Removal

23
IMG-340988
 

Remove the screws.

24
IMG-340989
 

Remove the part carefully

25
IMG-380933
 

Disconnect the connectors.

26
IMG-374439
 
27
IMG-374438
 

Remove the screws.

28
IMG-374497
 

Detach the panel.

29
IMG-374495
 

Disconnect the connector.

 

Accessory installation

30
IMG-374547
 

Install component that comes with the accessory kit.

31
IMG-362040
 

Locate the existing connector in the vehicle's cable harness.

Connect the connector.

32
IMG-374510
 

Tear off the excess foam tape.

Clamp the cables and connectors to the existing cables to prevent noise.

33
IMG-380923
 

Pull the wiring through.

34
IMG-380925
 

Install the clips as illustrated.

35
IMG-380941
 

Connect the prerouted cable.

36
IMG-380943
 

Connect the connectors.

37
 

Reinstall the removed parts in reverse order.

 

Removal

38
IMG-374244
 
39
IMG-340576
 
40
IMG-340547
 

Note!
Orientation view

41
IMG-340581
 
42
IMG-340552
 
43
IMG-340528
 
44
IMG-340524
 
45
IMG-374266
 
46
IMG-374267
 
 

Vehicles with 5-cyl engines

47
IMG-345234
 
48
IMG-345235
 
 

All vehicles

49
IMG-345236
 
50
IMG-345397
 

Remove the panel.

51
IMG-345237
 

Remove the screws.

52
IMG-345238
 
53
IMG-340716
 

Locate the rubber grommet under the insulating mat.

54
IMG-374511
 

Fold the floor carpet back.

Pull the wiring through.

55
IMG-345239
 

Remove the clips.

 

Accessory installation

56
IMG-340606
 

Fold the insulation to one side.


Use special tool: T9512932, Tension spring

57
IMG-340721
 
58
IMG-353681
 

Use: Expander pliers

Use: 1161427, Low temperature grease

59
IMG-374512
 
60
IMG-340726
 


Use special tool: T9512932, Tension spring

Pull the wiring through.

61
IMG-374513
 

Route the cable harness to the existing cable harness.

62
IMG-340539
 

Route the cable harness to the existing cable harness.

63
IMG-374322
 

Remove the panel.

 

Vehicles without Active Grille Shutter

64
IMG-340538
 
65
IMG-374341
 
 

Vehicles with Active Grille Shutter

66
IMG-340733
 
67
IMG-340611
 
68
IMG-340737
 
69
IMG-374363
 
70
IMG-375758
 

Note!
Orientation view


Note!
This step is easier with two people.

71
IMG-375748
 

Use: Angle drill machine


Use special tool: T9997482, Cutting tool

72
IMG-375795
 


Use special tool: T9997482, Cutting tool

73
IMG-375753
 

Use: Angle drill machine


Use special tool: T9997482, Cutting tool

74
IMG-375800
 
75
IMG-347781
 
76
IMG-347786
 
77
IMG-374396
 
78
IMG-374391
 
79
IMG-374418
 

Connect the connector.

80
 

Reinstall the removed parts in reverse order.

81
IMG-336901
 

Reinstall the battery's negative cable.

82
IMG-336904
 

Warning!
When switching the ignition on for the first time after a battery disconnect and connect, make sure to stand outside the vehicle and only reach into the vehicle keeping clear of the air bag deployment areas.

83
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.

Order and download software according to: 31285245