Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2016
XC60 (-17) 2016

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313700201.131399426, 31399425, 39822331, 39824091, 39824078, 39822422, 39822415, 39822408, 39822394, 39822387, 39822380, 39822373, 39822359, 39822352, 39822345, 39822338, 39822324
Running board




IMG-375551




 

Special tools

 

951 2782 Rivet nut tool

Tool number:951 2782

Tool description:Rivet nut tool

Tool boards:08


Equipment
IMG-345497
IMG-239664

IMG-376095


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Preparation

3
IMG-245980
 

Set the ignition key to position 0.

Wait for about 2 minutes until the vehicle has gone to sleep-mode.

 

Removal

4
IMG-287287
 

Remove the screws.

5
IMG-285505
 

Remove the screws.

6
IMG-296643
 
7
IMG-376181
 
  1. Release the connector's catch.

  2. Disconnect the connector.

  3. Remove the screw.

8
IMG-296684
 

Remove the screws.

9
IMG-296646
 

Note!
This step is easier with two people.

10
IMG-287303
 
11
IMG-287304
 

Remove the rubber strip.

12
IMG-287306
 

Release the catches.

Detach the panel.

13
IMG-296663
 

Remove all clips (8 pcs on each side) from the door sill, and in the front and rear wings, and replace them with new ones.

 

Accessory installation

14
IMG-381534
 
15
IMG-376097
 

Install the clips as illustrated.

16
IMG-376108
 

Note!
Orientation view

Note position of components.

17
IMG-376113
 

Note!
Orientation view

Note the position.

18
IMG-376167
 
19
IMG-376136
 
20
IMG-287346
 

Reinstall the rubber weatherstrip.

21
IMG-376305
 

Install the nut.

Note the position.


Use special tool: T9512782, Rivet nut tool

22
IMG-376324
 
  1. Install component that comes with the accessory kit.

  2. Install the screws.


  3. Note!
    Keep the part stretched during installation.


  4. Tightening torque: M10 , 50 Nm

23
IMG-287349
 

Ensure that all clips engage.

24
 

Reinstall the removed parts in reverse order.