Op. No.: 36630
Parking assistance, front is an excellent system that warns of obstructions when you have limited space in front of the car, for example with parallel parking.
The system is activated when the speed falls below 15 km/h. A signal indicates the distance to the object in front of the car. When an object is indicated, the radio's/stereo's sound level is muted and a pulsating "buzzer tone" comes from the car's front speakers. The sound starts when approx. 80 cm (59 in) remains to an obstacle and becomes a constant tone when the obstacle is approx. 30 cm (12 in) from the front bumper.
In order to differentiate between the front and rear systems, different tone frequencies are used and the sound comes from different speakers, front or rear.
The system consists of wiring and four sensors that are installed practically invisibly in the front bumper. The sensors are painted the same colour as the car bumper. Parking assistance can be disabled using the button in the center console when driving in a traffic jam or the like.
The system can produce "false" signals as a reaction to external sound sources with the same frequency as the system's sensors. Typical sources are the horn, wet tires on asphalt, air brakes and motorcycle exhaust pipes.
| Part. No. | Description | |
| 31664083 | Ch 628377- | Installation Instruction |
| 31664083 | Ch 517071-, Ch 628376 | Installation Instruction |
| Part. No. | ||
| 30660645 |
| Part. No. | ||
| 32219512 |
| Part. No. | ||
| 9192678 |
| Part. No. | Description | |
| 1161765 | Excl. CA, CN, JP, US |
| Part. No. | ||
| 9997234 |
Facts and advantages
Be aware of obstacles, for example, when parallel parking
The system can be mounted with or without bumper bars
Technical data
Accessory weight: | 0.7 kg (1.5 lbs) |
Photo: | VCC_04701 |
Note!
Front parking assistance can only be used in combination with rear parking assistance. Not in combination with auxiliary lights.
- Ordered according to separate procedures and downloaded using VIDA.
- Only for cars with bumper bars painted in Silverstone.
- Japan orders in accordance with a separate procedure.
- The hole punching tool can be used for several installations. Replace the tool with a new one when it becomes blunt. The hole making tool is ordered via SPX.
