2016 R.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC90 2016
XC90 (16-) 2016

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
316590431.131664736, 31408940, 31470197, 31470199, 31470201, 31470720
Media Server (Vehicles with Digital TV)




Equipment
A0000162
IMG-239660
IMG-423112

IMG-423228

IMG-423229


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

4
IMG-394535
 
 

Removal

5
 

Note!
The removal steps may contain installation details.

6
IMG-394779
 
7
IMG-383039
 

Remove the marked part.

8
IMG-383043
 


Tightening torque: Panel A-pillar , 4.5 Nm

9
IMG-383044
 

Remove the panel.

Check that the fasteners are undamaged before installation. If not, they must be replaced with new ones.

10
IMG-383045
 

Remove the nut.

11
IMG-383046
 

Remove the panel.

12
IMG-383040
 

Remove the marked part.

13
IMG-394727
 

Remove the marked part.

 

Vehicles with seven seats

14
IMG-401374
 
15
IMG-424681
 

Note!
The graphic shows the back of the component before removal.

16
IMG-424606
 

Remove the marked part.

17
IMG-424602
 

Remove the screw.


Tightening torque: Safety belt lower anchor to body (rear) , 40 Nm

 

Applies to all other vehicles

18
IMG-383042
 

Remove the marked part.

 

All vehicles

19
IMG-383047
 

Note!
Do not loosen the bolts more than 2 turns.

20
IMG-383048
 

Remove the panel.

Check that the fasteners are undamaged before installation. If not, they must be replaced with new ones.

21
IMG-383066
 

Remove the marked part.

22
IMG-393945
 

Remove the screws.


Tightening torque: Cargo anchor, to body , 13 Nm

23
IMG-397295
 
24
IMG-383125
 

Remove the panel.

25
IMG-396625
 

Remove the screw.

 

Vehicles with air suspension

26
IMG-398660
 
27
IMG-398661
 

Disconnect the connector.

 

All vehicles

28
IMG-383049
 

Remove the panel.

Disconnect the connectors.

29
IMG-413025
 

Remove the screws.

Disconnect the connector, if applicable.

Remove the marked part.

 

Vehicles with towbar

30
IMG-424386
 

Loosen the component indicated. Do not remove it.

 

All vehicles

31
IMG-423575
 

Disconnect the connectors.

32
IMG-423233
 

Remove the nut.

Remove the screws.

33
IMG-423234
 

Remove the marked part.

The part is not to be reused.

34
IMG-423746
 

Note!
Orientation view

35
IMG-423745
 

Remove the tape.

Adjust the position of the wiring harness.

 

Accessory installation

36
IMG-412964
 
37
IMG-422257
 

Install component that comes with the accessory kit.

38
IMG-423115
 
39
IMG-423215
 

Adjust the component to a horizontal position.

40
IMG-422245
 

Tighten the cable tie.

41
IMG-423232
 

Connect the connectors.

 

Vehicles with towbar

42
IMG-422218
 
43
IMG-422219
 
44
IMG-422223
 
45
IMG-424387
 

Reinstall the removed part.

 

All vehicles

46
IMG-422250
 

Connect the connector, if applicable.

Reinstall the removed part.

Reinstall the screws.

 

Vehicles with towbar

47
IMG-422256
 

Tighten the cable tie.

 

All vehicles

48
IMG-414053
 

Connect the connector.

49
IMG-414054
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

50
IMG-422397
 

Note!
Position the template so that its surfaces are aligned against the panel.

51
IMG-422398
 

Use a drill with the stated size

52
IMG-422399
 

Use a drill with the stated size

53
IMG-422005
 
54
IMG-421926
 

Note!
Do not fully tighten the nut yet.

Install the nut.

55
IMG-421950
 

Note!
Position the holder horizontally on the panel.

Tighten the nut.

Use hands only.

56
IMG-421925
 

Connect the prerouted cable.

57
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.

 

Installation

58
IMG-400000
 

Reinstall the removed parts in reverse order.

59
IMG-422420
 

Place the manual for this accessory in a suitable location in the car.