Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 2013
V60 (-18) 2013

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314143671.031357075
Infotainment, display upgrade




 

Materials

Designation

Part number

Isopropanol

1161721


Equipment
IMG-242205
A0000162
IMG-239667

IMG-379161


 
  
36660-2

Infotainment levels upgrade

Equipment

Designation

Electrician's screwdriver


 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-332193
 
4
IMG-345113
 

Remove the panel.

5
IMG-340590
 

Disconnect the connector.

6
IMG-340589
 

Remove the screws.

7
IMG-355818
 

Remove the screws.

 

Cars with automatic transmissions

8
IMG-340596
 
9
IMG-293007
 

Release the shift-lock function.

 

Cars with manual transmissions

10
IMG-354293
 

Release the catch which is located inside the gear lever boot.

Pull the locking sleeve and gear lever boot down. Take care so that the boot does not come loose from the lock ring.

11
IMG-347222
 
 

All vehicles

12
IMG-292804
 

Remove the panel.

13
IMG-292806
 

Fold the carpet to the side.

14
IMG-292823
 
  1. Unhook the cable harness clips.

  2. Disconnect the connector.

 

Vehicles with the 4C system.

15
IMG-292826
 

Remove the panel.

16
IMG-292827
 

Disconnect the connector.

 

All vehicles

17
IMG-340981
 
18
IMG-360002
 

Note!
The graphic shows the back of the component before removal.

19
IMG-345114
 

Carefully pry loose the bottom edge of the panel and then continue around the panel.

20
IMG-360001
 

Use: Electrician's screwdriver

21
IMG-345115
 

The part is not to be reused.

22
IMG-341794
 

Remove the screws.

23
IMG-341795
 
24
IMG-346175
 

Disconnect the connectors.

The part is not to be reused.

 

Accessory installation

25
IMG-370400
 
26
IMG-370423
 

Clean the surface.

Use: 1161721, Isopropanol

27
IMG-370424
 

Remove the protective film.

Install component that comes with the accessory kit.

28
IMG-370425
 

Note!
Ensure that the tape is fixed to the surface.

29
IMG-379160
 

Note!
The number of connectors may vary depending on the vehicle's equipment level.

Connect the prerouted cable.

Connect the connectors.

30
IMG-370742
 
31
IMG-341801
 

Reinstall the screws.

32
IMG-379163
 

Install component that comes with the accessory kit.

 

Installation

33
IMG-377070
 

Reinstall the removed parts in reverse order.

34
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31339812