Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2014
XC60 (-17) 2014

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314281611.031414412, 1319747, 1319738, 1319746, 31414411, 31414410, 39825247, 39825248, 31414399, 31414408, 31414402, 31414398, 31414409
Multimedia system, RSE, two screens, with two players




 

Materials

Designation

Part number

Cable tie, 750 mm

988734

Electrical tape


Equipment
IMG-242205
IMG-345497
IMG-239664

IMG-382145

IMG-382146


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-332193
 

Set the ignition key to position 0.

4
IMG-292804
 

Remove the panel.

5
IMG-292806
 

Fold the carpet to the side.

6
IMG-292823
 
  1. Unhook the cable harness clips.

  2. Disconnect the connector.

7
IMG-292826
 

Remove the panel.

 

Vehicles with the 4C system.

8
IMG-292827
 

Disconnect the connector.

 

All vehicles

9
IMG-345728
 

Remove the panel.

10
IMG-292863
 

Note!
Orientation view

11
IMG-292883
 

Repeat on the other side.

12
IMG-345737
 

Remove the panel.

13
IMG-345744
 

Remove the screws.

14
IMG-345282
 

Remove the screws.

 

Cars with automatic transmissions

15
IMG-345283
 
16
IMG-293007
 

Release the shift-lock function.

 

All vehicles

17
IMG-344796
 

Detach the panel.

Use hands only.

18
IMG-293010
 

Release the catches.

Detach the panel.

19
IMG-293011
 

Remove the panel.

 

Cars with manual transmissions

20
IMG-345292
 
 

All vehicles

21
IMG-293021
 
22
IMG-293022
 
23
IMG-293023
 

Remove the screws.

24
IMG-371300
 

Remove the screws.

25
IMG-372558
 

Adjust to the lowermost position.

Repeat on the other side.

26
IMG-372559
 

Adjust the seat to center position so that the seat fastening bolts can be removed.

Repeat on the other side.

27
IMG-332179
 
28
IMG-329148
 
29
IMG-329150
 
30
IMG-340980
 

Remove the screws.

31
IMG-303005
 
32
IMG-303006
 

Remove the screws.

 

Alternative 1

33
IMG-380657
 
 

Alternative 2

34
IMG-380655
 
35
IMG-380656
 
 

All vehicles

36
IMG-329151
 
37
IMG-329209
 

Remove the screws.

Disconnect the connector.

38
IMG-329153
 

Caution!
Be extra careful when removing or installing this component.

39
IMG-358761
 
40
IMG-358762
 
41
IMG-377070
 

Repeat the steps when removing on opposite side.

 

Accessory installation

42
IMG-382958
 

Thread the cable tie from the head restraint's inner mounting.

Route the cable tie inside the backrest between the upholstery's thin foam and the impact protection.

Use: 988734, Cable tie, 750 mm

43
IMG-337624
 

Place the component where indicated in the graphic.

44
IMG-379514
 

Tape the cables on the cable tie.

Use: , Electrical tape

45
IMG-382967
 

Pull the wiring through.

46
IMG-382074
 

Pull the wiring through.

Remove the tape.

47
IMG-337623
 

Place the component where indicated in the graphic.

The cables must be positioned in front of the head restraint's tube.

48
IMG-380660
 

Pull the wiring through.

49
IMG-380661
 

Caution!
Check that the component has locked in its bottom position.

50
IMG-262956
 

The image shows seat without upholstery.

Using your fingers, push the cable harness under the protective pad. After installation, the cable harness must not appear under the upholstery.

  1. padding

  2. Protective pad

51
IMG-344892
 

Caution!
Make sure that no part of the wiring harness is trapped.

The image shows seat without upholstery.

Route the cable harness to the existing cable harness.

Install the cables.

52
IMG-377070
 

Repeat the steps when installing accessories on opposite side.

 

Removal

53
IMG-293024
 
 

Vehicles with headset sockets

54
IMG-293025
 
55
IMG-293026
 

Disconnect the connector.

 

All vehicles

56
IMG-293021
 
57
IMG-329163
 
58
IMG-293028
 
59
IMG-293029
 

Remove the panel.

60
IMG-329164
 
61
IMG-344819
 

Disconnect the connector.

 

Accessory installation

62
IMG-344825
 

Install component that comes with the accessory kit.

63
IMG-344827
 
64
IMG-344828
 

Install the part with butyl tape.

65
IMG-329435
 

Pull the wiring through.

66
IMG-329164
 

Caution!
Make sure that no part of the wiring harness is trapped.

Reinstall the removed part.

67
IMG-330503
 

Secure the cable marked "Right side" using a cable tie.

68
IMG-330504
 

Connect the connector.

69
IMG-344830
 

Connect the connector.

70
IMG-344831
 

Place the component where indicated in the graphic.

71
IMG-344832
 

Position the cable harness excess as illustrated.

72
IMG-329448
 

Route the cable marked "Left side" over to the left-hand side.

73
IMG-344833
 

Position/route the cable harness as illustrated.

74
IMG-345746
 

Remove the panel.

75
IMG-374497
 
76
IMG-374495
 

Locate the connector.

Disconnect the connector.

77
IMG-382629
 

Install component that comes with the accessory kit.

Disconnect the connector.

78
IMG-362040
 

Connect the connector.

79
IMG-382640
 

Tear off the excess foam tape.

80
IMG-330574
 

Secure the cable marked "Left side" using a cable tie.

81
IMG-382650
 
82
IMG-344841
 
83
IMG-344843
 

Tear off the excess foam tape.

84
IMG-344844
 

Route the cable marked "Right side" over to the right-hand side.

85
IMG-344845
 

Position/route the cable harness as illustrated.

86
IMG-344846
 

Position/route the cable harness as illustrated.

87
IMG-330705
 

Install the cables.

88
IMG-344847
 

Position/route the cable harness as illustrated.

89
IMG-330708
 

Install the cables.

 

Installation

90
IMG-329473
 

Caution!
Be extra careful when removing or installing this component.

Reinstall the front seat.

91
IMG-382644
 
92
IMG-373200
 

Note!
The graphic shows the back of the component before removal.

93
IMG-373202
 

Remove the screw.

94
IMG-373206
 

Remove the panel.

95
IMG-344852
 

Connect the connectors.

96
IMG-330728
 

Connect the connectors.

97
IMG-330729
 
98
IMG-330730
 
99
IMG-330731
 
100
IMG-329270
 

Connect the connector.

Tighten the screw.

101
IMG-329268
 

Install the cables.

102
IMG-329269
 
103
 

Repeat the steps when installing on opposite side.

104
 

Reinstall the removed parts in reverse order.

105
IMG-336901
 

Reinstall the battery's negative cable.

106
IMG-336904
 

Warning!
When switching the ignition on for the first time after a battery disconnect and connect, make sure to stand outside the vehicle and only reach into the vehicle keeping clear of the air bag deployment areas.

Set the ignition key to position II.

107
IMG-382943
 

Set the clock.

108
IMG-382631
 
109
IMG-382632
 
110
 

Place the manual for this accessory in a suitable location in the car.

111
IMG-275777
 

Adapt the DVD player to the vehicle according to: Product specifications/Design and Function/3 Electrical system/39 Media - communication and entertainment/393 Equipment for entertainment/System for rear seat entertainment/Design