Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 2014
V60 (-18) 2014 D82PHEV

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313462311.031350479, 31407107, 31373184
Towbar, wiring and control module (Plug-in Hybrid)




 

Materials

Designation

Part number

Isopropanol

1161721

Cleaning agent

1161721


Equipment
IMG-242205
IMG-345497
IMG-332314
IMG-239664

IMG-371903


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

This instruction covers a Plug-In Hybride vehicle.

3
IMG-373194
 

Warning!
Observe caution when working near the high voltage system.

This car is equipped with a high voltage type electrical system.

Components in the high voltage system work with dangerous voltages.

These components are connected with orange wires.

 

Removal

4
IMG-245980
 

Set the ignition key to position 0.

5
IMG-372058
 
6
IMG-372060
 

Remove the screws.

7
IMG-372061
 
8
IMG-372065
 

The part is not to be reused.

 

Accessory installation

9
IMG-372140
 

Install component that comes with the accessory kit.

10
IMG-373505
 

Note!
Orientation view

11
IMG-340668
 

Caution!
Make sure that the rubber grommet seals properly to the body.

12
IMG-372167
 

Install component that comes with the accessory kit.

13
IMG-372321
 

Install the cable.

14
IMG-372081
 

Route the cable harness to the existing cable harness.

15
IMG-372168
 

Install component that comes with the accessory kit.

Install the screw.

16
IMG-372083
 

Use: 1161721, Isopropanol

Wipe dry.

17
IMG-356179
 

Use: 1161721, Cleaning agent

Wipe dry.

18
IMG-356181
 
19
IMG-222282
 
20
IMG-372169
 
21
IMG-356351
 

When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

22
IMG-356352
 

Remove the protective film.

23
IMG-373185
 

Locate the pre-routed connectors.

24
IMG-372669
 

Note!
Make sure to follow the sequence indicated.

Connect the connectors.

25
IMG-372096
 

When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

Clamp the cables and connectors to the existing cables to prevent noise.

26
IMG-372099
 
27
IMG-372100
 
28
IMG-340349
 

Remove the clip.

29
IMG-372406
 
30
IMG-372409
 
31
IMG-372177
 
32
IMG-372101
 
33
IMG-372105
 
34
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.

 

Check

35
IMG-348017
 

Note!
To activate the trailer module (TRM) at least two light sources (lamps) must be connected. This can be done by connecting test equipment for the trailer connector, or a trailer.

  1. Left indicator lamp

  2. Fog tail lamps.

  3. Ground connection

  4. Right indicator lamp

  5. Right position lamp

  6. Brake light

  7. Left position lamp

  8. Back-up lamp

  9. Battery voltage, constant

  10. Battery voltage, ignition on

  11. Ground connection

  12. Not connected

  13. Ground connection

36
 

Reinstall the removed parts in reverse order.