Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 2014
V60 (-18) 2014

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313389601.131359732, 30791000
Towbar, fixed




 

Special tools

 

999 5972 FIXTURE (UNIVERSAL/TRANSAXLES)

Tool number:999 5972

Tool description:FIXTURE (UNIVERSAL/TRANSAXLES)

Tool boards:43

 

998 5972 JACK (HYDRAULIC)

Tool number:998 5972

Tool description:JACK (HYDRAULIC)

Tool boards:40

 

999 7338 Extension rod

Tool number:999 7338

Tool description:Extension rod

Tool boards:80


Materials

Designation

Part number

Rust inhibitor, low viscosity


Equipment
A0000162
IMG-239664
IMG-240693
IMG-239666

IMG-355047


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-371600
 

Remove the screws.

4
IMG-337277
 

Remove the screws.

5
IMG-337278
 

Remove the screws.

6
IMG-343213
 
7
IMG-337279
 

Request the aid of a colleague for this procedure.

8
IMG-337311
 
9
IMG-337283
 

Note!
The screws are to be reused.

Remove the screws.

10
IMG-337281
 

Remove the screws.

11
IMG-337285
 
12
IMG-337286
 
13
IMG-337287
 
14
IMG-337288
 

Caution!
Make sure that the exhaust flexible pipe is not forcibly bent or twisted.

15
IMG-374625
 
16
IMG-337290
 
17
IMG-337291
 
18
IMG-337312
 
19
IMG-337292
 
20
IMG-337293
 

Scrape off all sealant from the flat surface.

Clean the surface.

Repeat on the other side.

 

Accessory installation

21
IMG-337313
 
22
IMG-355355
 

Note!
Note the position.

23
IMG-355356
 

Caution!
Make sure that the exhaust flexible pipe is not forcibly bent or twisted.


Note!
Only tighten the nut finger tight at this stage.

Install the screws.

Repeat on the other side.


Use special tool: T9995972, FIXTURE (UNIVERSAL/TRANSAXLES)

Use special tool: T9985972, JACK (HYDRAULIC)

24
IMG-371531
 

Repeat on the other side.

25
IMG-371532
 

Repeat on the other side.


Use special tool: T9997338, Extension rod

 

Installation

26
IMG-338567
 
27
IMG-337289
 
28
IMG-337319
 
29
IMG-337297
 
30
IMG-337298
 
31
IMG-337299
 
32
IMG-337320
 

Use: , Rust inhibitor, low viscosity

Repeat on the other side.

33
IMG-337977
 
 

Removal

34
IMG-376852
 

Locate relevant marking.

35
IMG-376800
 

Caution!
Take extra care not to damage the wiring harnesses.

36
IMG-376854
 
37
IMG-376855
 

Deburr edges

 

Vehicles with Skidplate

38
IMG-376856
 

Locate relevant marking.

39
IMG-376857
 

Apply tape to the other side, opposite the marking lines.

40
IMG-376804
 

Caution!
Take extra care not to damage the wiring harnesses.

41
IMG-376858
 
42
IMG-376859
 

Deburr edges

 

Vehicles with R-design

43
IMG-376860
 

Locate relevant marking.

44
IMG-376804
 

Caution!
Take extra care not to damage the wiring harnesses.

45
IMG-376862
 
46
IMG-376864
 

Deburr edges

 

Vehicles with Polestar Performance diffuser

47
IMG-418752
 

Cut the component following the instructions in the graphic.

Deburr edges

 

All vehicles

48
 

Reinstall the removed parts in reverse order.