Battery Charger - XC90 2019 - Volvo Cars Accessories

2019 L.H.D

XC90 Cars

Installation Instruction

Installation instructions, accessories

Volvo Car Corporation Gothenburg, Sweden

XC90 2019

XC90 (16-) 2019

Instruction No		Version		Part. No.
31414629		1.1		32241082, 31414288

Battery Charger

IMG-389985

Equipment

IMG-263203

IMG-239664

IMG-239660

IMG-240693

IMG-391965

IMG-392010

IMG-398640

Information

1

Read through all of the instructions before starting installation.
Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.
Ensure that all tools stated in the instructions are available before starting installation.
Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

2

IMG-363036

Used for focused component, the component with which you will do something.
Used as extra colors when you need to show or differentiate additional parts.
Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.
Used when the component is not fully removed from the vehicle but only hung to the side.
Used for standard tools and special tools.
Used as background color for vehicle components.

Removal

3

IMG-394535

4

IMG-387004

5

IMG-394520

6

IMG-382828

Remove the screws.

Remove the marked part.

7

IMG-398442

Remove the screws.

Remove the clip.

8

IMG-398443

Remove the screws.

Remove the marked part.

9

IMG-398445

Remove the nuts.

Remove the screw.

10

IMG-398446

Remove the screw.

Remove the clips.

11

IMG-397073

Remove the marked part.

12

IMG-390451

Open the hood.

13

IMG-390332

Remove the rubber strip.

14

IMG-398438

Remove the clips.

Remove the marked part.

15

IMG-390621

Remove the clips.

Remove the marked part.

16

IMG-428816

Loosen the screws.

Loosen the exact number of turns indicated in the image.

17

IMG-398765

18

IMG-399407

Use: Air-powered air saw

Accessory installation

19

IMG-392258

20

IMG-392256

21

IMG-392260

Note!
Note the position.

22

IMG-392257

Pull the wiring through.

23

IMG-392262

24

IMG-392261

Tighten the nut.

25

IMG-393836

26

IMG-393833

Install component that comes with the accessory kit.

27

IMG-393834

Note!
Orientation view

28

IMG-428819

Tighten the bolts.

Tightening torque: M8 , 24 Nm

29

IMG-393832

Install the screws.

Tightening torque: M6 , 10 Nm

30

IMG-391628

Connect the connector.

31

IMG-391629

Install the catch.

Press until a click is heard.

32

IMG-398641

Tighten the cable ties.

33

IMG-391771

Install the cable.

34

IMG-391783

Install the clips as illustrated.

35

IMG-391807

Install the clips as illustrated.

36

IMG-391565

Note!
Orientation view

37

IMG-391573

Release the catches.

Fold marked part aside.

38

IMG-391924

Remove the nut.

39

IMG-391926

Install the cables.

40

IMG-391929

Install the nut.

Tightening torque: M6 , 10 Nm

41

IMG-391930

Press until a click is heard.

42

IMG-391891

Install the cable.

43

IMG-391485

Remove the screws.

Remove the marked part.

44

IMG-391492

Remove the nut.

45

IMG-391496

Connect the cable.

46

IMG-391591

Install the nut.

Tightening torque: M8 , 24 Nm

Installation

47

Reinstall the removed parts in reverse order.