Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S60 2012
S60 (11-18) 2012

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
307564421.130756440, 30756439, 30756437, 30756436, 30756441
Mirrors, foldable




 
Equipment
IMG-275777
A0000162
IMG-338691

IMG-339496

IMG-339497


 
  

INTRODUCTION

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 
1
IMG-332193
 


Caution!

Wait at least one minute before unplugging the connectors or removing other electrical equipment.


2
IMG-339501
 

  • Remove the panel. Disconnect any connectors.

3
IMG-339510
 

  • Remove the screws.

4
IMG-339518
 


Note!

The clips consist of two parts.


5
IMG-339520
 

6
IMG-339530
 

7
IMG-339531
 

  • Unplug the connectors.

  • Remove the panel.

8
IMG-339532
 

Applies when replacing the control module.

 
9
IMG-339533
 

  • Unplug the connectors.

10
IMG-339534
 

  • Component(s) must not be reused.

11
IMG-339535
 

12
IMG-339533
 

  • Plug in the connectors.

 
13
IMG-339536
 

Applies to all models

Applies to all models

  • Remove the glass from the mirror.


    Caution!

    Observe caution, the glass is easily breakable.


Use special tool: 9997390 Wedge

14
IMG-339537
 

  • Unplug the connectors.

15
IMG-339538
 

  • Remove the component carefully.

16
IMG-339541
 

  • Release the catches.

  • Unplug the connector.

17
IMG-339544
 

  • Loosen the screw(s).

18
IMG-339545
 

  • Release the catches.

19
IMG-339546
 

  • Remove the motor unit.

20
IMG-339547
 

  • Disconnect the connector(s).

21
IMG-339548
 

  • Remove the cable harness clip (1).

  • Unplug the connector (2).

22
IMG-339549
 

  • Remove the screws.

23
IMG-339550
 

  • Component(s) must not be reused.

24
IMG-339551
 

  • Reinstall the detached components in reverse order.

25
IMG-339552
 

  • Connect the connector. Repeat all method steps for the other side.

26
IMG-242268
 

  • Download software (application) for the accessory's function according to service information in VIDA. See VIDA or accessories catalogue for article number on software.