Op. No.: 36687 36630
Front parking assistance is an excellent system that warns of obstructions when you have limited space in front of the car, e.g. with tight parking.
The signal indicates objects in front of the car when speed is less than 15 km/h (10 mph). At indication, the radio's/stereo's sound level is muted and a pulsating "buzzer tone" starts to sound in the car's front speakers. The tone starts to sound when approx. 80 cm (30 in) remains to an obstacle and becomes a constant tone when the distance is approx. 30 cm (12 in) from the front bumper. To differentiate between front and rear systems, different frequencies are used for the tone and the sound comes from different speakers, front or rear.
The kit consists of four sensors that are installed in the front bumper and wiring. The sensors are painted in the same colour as the car's bumper.
The system can sometimes generate "false" signals as a reaction to external sound sources with the same frequency as the system's sensors. Typical sources are horns, wet tyres on asphalt, air brakes and motorcycles' exhaust pipes. The switch below makes it easy to turn the system off.
| Part. No. | Description | |
| 31664084 | Ch 97000- |
| Part. No. | ||
| 30660684 |
| Part. No. | ||
| 9192678 |
| Part. No. | Description | |
| 1161765 |
| Part. No. | Description | |
| 9997234 | Ch 97000- | |
| 9814069 | Ch -96999 |
Facts and advantages
Makes you aware of obstacles when parallel parking or the like
Technical data
Accessory weight: | 0.7 kg (1.5 lbs) |
Photo: | VCC_08460, vccpartners |
Note!
Front parking assistance can only be used in combination with rear parking assistance. Not in combination with auxiliary lights.
- Ordered according to separate procedures and downloaded using VIDA.
- Use an opened pack immediately.
- The hole punching tool can be used for several installations. Replace the tool with a new one when it becomes blunt.
