| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
| | IMG-363036 |
|
| | Note! This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps. |
Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components.
|
| | |
| | IMG-495139 |
|
| | |
| | IMG-495141 |
|
| | Remove the part carefully |
| | IMG-495144 |
|
| | Remove the clip. Remove the screws. Remove the marked part. |
| | IMG-495146 |
|
| | Remove the part carefully |
| | IMG-495161 |
|
| | |
| | IMG-495138 |
|
| | The graphic shows the back of the component. |
| | IMG-495168 |
|
| | Note! This step is easier with two people. |
Remove the marked part. |
| | IMG-495175 |
|
| | The part is to be reused. Loosen the clips. Remove the marked part. |
| | |
| | IMG-495179 |
|
| | |
| | IMG-495181 |
|
| | |
| | IMG-372305 |
|
| | Use special tool: T9512782, Rivet nut tool
Reset the tool. |
| | IMG-465353 |
|
| | Install component that comes with the accessory kit. |
| | IMG-465351 |
|
| | Use hands only. The outermost thread of the tool should be flush with the rivet nut end. |
| | IMG-465130 |
|
| | Press the tool against the surface. Hold the tool at right angles to the surface. |
| | IMG-465133 |
|
| | Tighten to the value stated. Install rivet nut in the other location. |
| | IMG-495311 |
|
| | Check the value. Use: Vernier caliper
|
| | IMG-495187 |
|
| | Install component that comes with the accessory kit. Tighten the screw 2 turns. |
| | IMG-495189 |
|
| | Install component that comes with the accessory kit. |
| | IMG-495201 |
|
| | Install components that come with the accessory kit. |
| | IMG-495207 |
|
| | Note! This step is easier with two people. |
Fold marked part aside. Install component that comes with the accessory kit. |
| | IMG-495213 |
|
| | Press the clip(s) into position. |
| | IMG-495236 |
|
| | Install component that comes with the accessory kit. Tighten the nut 2 turns. Tighten the screw 2 turns. |
| | IMG-495246 |
|
| | Tighten the screw. Tightening torque: M10
, 50 Nm
|
| | IMG-495258 |
|
| | Install component that comes with the accessory kit. |
| | IMG-495276 |
|
| | Tighten the nut. Tighten the screw. Tightening torque: M8
, 24 Nm
Tightening torque: M10
, 50 Nm
|
| | IMG-495287 |
|
| | Use details according to image. Reinstall the removed part. Ensure that all clips engage. |
| | IMG-495288 |
|
| | Install component that comes with the accessory kit. |
| | IMG-477509 |
|
| | Caution! Make sure not to damage painted surfaces. |
Hint This step may require the aid of another technician. |
|
| | IMG-495318 |
|
| | Fold marked part aside. Install component that comes with the accessory kit. |
| | IMG-495329 |
|
| | Ensure that all clips engage. |
| | Repeat all method steps for the other side. |
| | |
| | Reinstall the removed parts in reverse order. |