Op. No.: 36630 36687
Front parking assistance is an excellent system that warns of obstructions when you have limited space in front of the car, e.g. with tight parking.
The system is activated when the speed is less than 15 km/h (10 mph). A signal indicates distance to objects in front of the car. When an object is indicated, the radio's/stereo's volume is muted and a pulsating "buzzer tone" comes from the car's front loudspeakers. The tone starts to sound when approx. 80 cm (30 in) remains to an obstacle and becomes a constant tone when the distance is approx. 30 cm (12 in) from the front bumper. To be able to differ between the front and rear systems, different frequencies are used for the tone and the sound comes from different loudspeakers, front or rear.
The kit consists of wiring and four sensors that are installed just about invisibly in the front bumper. The sensors are painted in the same colour as the car's bumper.
The system can sometimes produce "false" signals in response to external sound sources with the same frequency as the system's sensors. Typically, such sources are horns, wet tyres on asphalt, pneumatic brakes and motorcycle exhaust pipes. The system can be easily deactivated with the push of a button using the switch below.
|31664084||Ch 139684-||Installation Instruction|
|30782183||08-, For cars with BLIS without "Start/Stop||Installation Instruction|
|30782183||08-, For cars without BLIS with "Start/Stop"||Installation Instruction|
|31269429||08-, For cars with BLIS and "Start/Stop"||Installation Instruction|
|31399075||08-, For cars without BLIS and without "Start/Stop"||Installation Instruction|
Facts and advantages
Makes you aware of obstacles when parallel parking or the like
0.7 kg (1.5 lbs)
Front parking assistance can only be used in combination with rear parking assistance. Not in combination with auxiliary lights.
- Ordered according to separate procedures and downloaded using VIDA.
- Use an opened pack immediately.
- The hole punching tool can be used for several installations. Replace the tool with a new one when it becomes blunt. The hole making tool is ordered via SPX.