2015 L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2015
XC60 (-17) 2015 B6304T4 Europe

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313995921.031373734, 31408281
Battery Charger (R-design)




IMG-378302




Special tools

 

951 2782 Rivet nut tool

Tool number:951 2782

Tool description:Rivet nut tool

Tool boards:08


Materials

Designation

Part number

Electrical tape

Isopropanol

1161721


Equipment
IMG-242205
IMG-345497

IMG-375372

IMG-374525

IMG-372109

IMG-379391


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-332179
 

  1. Set the ignition key to position 0.

  2. Remove the battery's negative cable.

5
IMG-352021
 


Tightening torque: Wheel to wheel hub
Stage 1: 20 Nm
Stage 2: 140 Nm

6
IMG-375422
 

Remove the screws.

7
IMG-375426
 

Remove the screws.

8
IMG-375433
 

Remove the nuts.

9
IMG-375642
 
10
IMG-374576
 

Remove the tape.

 

Accessory installation

11
IMG-374853
 


Use special tool: T9512782, Rivet nut tool

12
IMG-379415
 

Clean the Bumper Cover surface.

13
IMG-379417
 

Note!
Check that the bar scale is correct.

Take the template from the kit and cut it out following the dotted line.

14
IMG-379439
 

Use tape

15
IMG-379445
 
16
IMG-367881
 
17
IMG-351436
 

Pull the wiring through.

18
IMG-367882
 
19
IMG-374227
 
20
IMG-375550
 
21
IMG-375558
 

Note!
Orientation view

22
IMG-375560
 
23
IMG-375576
 

Install the screw.

24
IMG-375514
 

Note!
Orientation view

25
IMG-375578
 
26
IMG-374442
 
27
IMG-375580
 
28
IMG-374446
 
29
IMG-374451
 

Install the clip(s).

30
IMG-374470
 
31
IMG-374472
 
32
IMG-374474
 

Install the clip(s).

 

Vehicles with Alarm siren

 

Removal

33
IMG-375599
 

Note!
Orientation view

34
IMG-374832
 

Disconnect the connector.

35
IMG-374828
 

Remove the screws.

 

All vehicles

 

Accessory installation

36
IMG-374553
 
37
IMG-374568
 
38
IMG-374562
 

Install the screws.

39
IMG-375848
 

Install the clip(s).

40
IMG-374835
 
41
IMG-374570
 

Install the catch.

42
IMG-374571
 

Install the cables.

 

Vehicles with Alarm siren

43
IMG-374843
 
44
IMG-375218
 
45
IMG-374862
 

Install the screw.

46
IMG-374856
 

Install the screws.

47
IMG-374860
 

Connect the connector.

 

Vehicles without Alarm siren

48
IMG-375885
 
49
IMG-375218
 
50
IMG-374862
 

Install the screw.

51
IMG-375886
 

Install the screws.

Install the nuts

 

All vehicles

52
IMG-374863
 
53
IMG-374882
 
54
IMG-374527
 

Install the clip(s).

55
IMG-374963
 
56
IMG-374526
 
57
IMG-375011
 
58
IMG-375030
 

Note!
Orientation view

59
IMG-375630
 
60
IMG-375042
 
61
IMG-375049
 

Install the clip(s).

 

Removal

62
IMG-375631
 

Remove the rubber strip.

63
IMG-375632
 
64
IMG-375075
 
65
IMG-375065
 

Remove the screws.

66
IMG-375083
 

Unhook the clip(s).

67
IMG-375085
 
68
IMG-375080
 
69
IMG-375093
 
70
IMG-375099
 
71
IMG-375100
 
72
IMG-376051
 

Remove the screw.

73
IMG-376052
 
 

Accessory installation

74
IMG-375635
 
 

Installation

75
IMG-376051
 

Reinstall the screw.

 

Accessory installation

76
IMG-375637
 
77
IMG-375638
 

Install the clip(s).

78
IMG-375639
 
79
IMG-375640
 
80
IMG-375110
 

Install the screw.


Tightening torque: M6 , 10 Nm

 

Removal

81
IMG-375129
 
82
IMG-375131
 
83
IMG-375143
 
84
IMG-375146
 

Caution!
Cut carefully to avoid unintentional damage or personal injury.

 

Accessory installation

85
IMG-375150
 

Use: Expander pliers

86
IMG-375151
 

Pull the wiring through.

87
IMG-376501
 

Use: , Electrical tape

Wrap tape around the cable to increase the diameter.

Increase the diameter to 6.5 mm.

88
IMG-375153
 

Remove the nut.

89
IMG-375161
 


Tightening torque: M6 , 10 Nm

Install the nut.

90
IMG-376433
 
91
IMG-376438
 
92
IMG-376507
 

Clean the surface.

Use: 1161721, Isopropanol

93
IMG-376511
 

Use: , Electrical tape

94
IMG-376442
 
 

Installation

95
IMG-375167
 
96
IMG-375093
 
97
IMG-375168
 
98
IMG-375169
 
99
IMG-375172
 
100
IMG-375170
 
101
IMG-375065
 

Install the screws.

102
IMG-375171
 

Install the clip(s).

103
IMG-375172
 
104
IMG-375174
 
 

Accessory installation

105
IMG-375192
 

Install the clip(s).

106
 

Reinstall the removed parts in reverse order.

© Volvo Car CorporationBattery Charger (R-design)- 31399592 - V1.0
volvocars.com
Lifestyle Collection
Find a Dealer
Georgia

Cookies Legal Disclaimer Privacy Policy Copyright

Copyright © 2024 Volvo Cars. All rights reserved.