Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 2012
V60 (-18) 2012

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
307567841.130756667
Bumper cover




IMG-345661




 

Materials

Designation

Part number

Isopropanol

1161721


Equipment
IMG-244945
IMG-221380

IMG-345638


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
 

When installing, the car must retain a temperature of 20 degrees C.

After installation, the car must not be driven for 2 hours

After installation, the car must not be washed for 48 hours

3
IMG-345642
 

Clean the surface.

Allow to dry.

4
IMG-345625
 

Use suitable tape to indicate the center.

5
IMG-345626
 

Use suitable tape to indicate the center.

6
IMG-345624
 

Cut off a piece of the transparent foil, as indicated.

7
IMG-345997
 

Cut off a piece of the transparent foil, as indicated.

8
IMG-345632
 

Center the Bumper Cover, using the tape marks and the values in the graphic.

9
IMG-346022
 

Note!
Make sure that the Bumper Protection is installed on the flat bumper surface only, not covering any sharp radius.

10
IMG-345641
 

Use appropriate tape to mark the position.

11
IMG-345636
 

Clean the Bumper Cover surface.

Allow to dry.

Use: 1161721, Isopropanol

12
IMG-345623
 

Cut in the lower transparent foil in the middle.

13
IMG-378604
 

Pull off the top protection foil, if applicable.

14
IMG-345942
 

Adjust the position of the Bumper Protection using the tape marks.

15
IMG-347431
 

Note!
Use tape to temporarily fix the bumper cover in the correct position.

16
IMG-347451
 

Note!
Touching the adhesive surface will impair rebonding.

Partly fold back the transparent foil to expose the sticky surface.

17
IMG-345943
 

Allow the Bumper Protection to adhere to the Bumper Cover as indicated.

18
IMG-345944
 

Pull off the rest of the transparent foil and press by hand on the Bumper protection to make it cling to the Bumper Cover.

19
IMG-345945
 

Pull off the rest of the transparent foil and press by hand on the Bumper protection to make it cling to the Bumper Cover.

20
IMG-345646
 

Thoroughly press, by hand, all over the Bumper Protection to make it cling properly.

Use suitable tool to squeeze out any trapped air bubbles.