Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V70 2008
V70 (08-) 2008

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313597271.331414266, 31359740, 31359718
Towbar, fixed




 

Materials

Designation

Part number

Rust inhibitor, low viscosity


Equipment
IMG-345497
IMG-239664
IMG-240693
IMG-256903
IMG-282923
IMG-282924

IMG-378419


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-259683
 
4
IMG-259753
 

Remove the nuts.

5
IMG-259685
 

Remove the screws.

Repeat on the other side.

6
IMG-273303
 

Remove the screw.

Repeat on the other side.

7
IMG-379374
 

Repeat on the other side.

8
IMG-379375
 

Caution!
Push the bumper casing down when removing, so as not to damage the rear lights.


Note!
This step is easier with two people.

Repeat on the other side.

9
IMG-379386
 

Note!
This step is easier with two people.

Release the connector's catch.

Disconnect the connector.

10
IMG-379388
 

Caution!
Place the Bumper Cover on a suitable surface.


Note!
This step is easier with two people.

11
IMG-261414
 
12
IMG-259759
 

Remove the screws.

13
IMG-259760
 

Remove the panel.

14
IMG-259761
 

Remove the screws.

On both sides.

15
IMG-377019
 

Remove the panel.

16
IMG-377020
 

Caution!
Take extra care not to damage the wiring harnesses.

Remove the screw.

17
IMG-259763
 
 

Vehicles with double Exhaust End Pipes and AWD

18
IMG-378179
 

Note!
Orientation view

19
IMG-260846
 
20
IMG-378176
 
 

Vehicles with Double Exhaust End Pipes and 2WD

21
IMG-378201
 
22
IMG-378200
 
 

Applies to vehicles with double end pipe

23
IMG-259825
 

Remove the screws.

24
IMG-378203
 

Note!
This step is easier with two people.

25
IMG-260849
 

Remove the clips.

26
IMG-378129
 
27
IMG-364281
 

Measure and mark as illustrated.

Remove the tape.

Repeat on the other side.

28
IMG-260852
 

Caution!
Make sure that the surface is clean and free of foreign material.

Clean the surface.

Repeat on the other side.

 

Accessory installation

29
IMG-378415
 
30
IMG-378423
 

Note!
Note the position.

Repeat on the other side.

31
IMG-378424
 

Note!
This step is easier with two people.


Note!
Only tighten the bolts finger tight at this stage.

Install the screws.

Repeat on the other side.

32
IMG-378425
 

Repeat on the other side.

33
IMG-378426
 

Repeat on the other side.

 

Installation

34
IMG-378136
 
35
IMG-261083
 

Install the clip(s).

36
IMG-378220
 
37
IMG-282946
 

Measure and mark as illustrated.

38
IMG-378212
 

Note!
This step is easier with two people.

39
IMG-282963
 

Install the screws.


Tightening torque: M10 , 50 Nm

40
IMG-260865
 
41
IMG-378218
 

Warning!
Make sure that there are no leaks.


Note!
Ensure that the exhaust clamp cannot come into contact with surrounding parts during operation.

 

Removal

 

Vehicles with Single Exhaust End Pipe and AWD

42
IMG-259824
 
43
IMG-259827
 

Remove the screw.

44
IMG-260867
 

Remove the clips.

45
IMG-260868
 

Note!
Always use new seals, screws and nuts.

Remove the nuts.

46
IMG-260869
 

Caution!
Make sure that the exhaust flexible pipe is not forcibly bent or twisted.

47
IMG-260870
 
48
IMG-260871
 
49
IMG-364281
 

Measure and mark as illustrated.

Remove the tape.

Repeat on the other side.

50
IMG-260852
 

Caution!
Make sure that the surface is clean and free of foreign material.

Clean the surface.

Repeat on the other side.

 

Accessory installation

51
IMG-378415
 
52
IMG-378423
 

Note!
Note the position.

Repeat on the other side.

53
IMG-378424
 

Note!
This step is easier with two people.


Note!
Only tighten the bolts finger tight at this stage.

Install the screws.

Repeat on the other side.

54
IMG-378425
 

Repeat on the other side.

55
IMG-378427
 

Repeat on the other side.

 

Installation

56
IMG-260923
 
57
IMG-260867
 

Install the clip(s).

58
IMG-378222
 

Note!
Always use new seals, screws and nuts.

Install the nuts

59
IMG-259871
 

Install the screw.


Tightening torque: M10 , 50 Nm

60
IMG-259873
 
 

Removal

 

Vehicles with Single Exhaust End Pipe and 2WD

61
IMG-259823
 
62
IMG-259827
 

Remove the screw.

 

Vehicles with 4 cyl diesel engine

63
IMG-259836
 

Caution!
Make sure that the exhaust flexible pipe is not forcibly bent or twisted.


Note!
Always use new seals, screws and nuts.

Remove the nuts.

 

Vehicles with 4-cyl gasoline engine

64
IMG-259837
 

Caution!
Make sure that the exhaust flexible pipe is not forcibly bent or twisted.


Note!
Always use new seals, screws and nuts.

Remove the nuts.

 

Vehicles with 5-cyl diesel engine

65
IMG-259838
 

Caution!
Make sure that the exhaust flexible pipe is not forcibly bent or twisted.


Note!
Always use new seals, screws and nuts.

Remove the nuts.

 

Vehicles with 2WD

66
IMG-259829
 

Remove the clips.

67
IMG-260925
 
68
IMG-364281
 

Measure and mark as illustrated.

Remove the tape.

Repeat on the other side.

69
IMG-260852
 

Caution!
Make sure that the surface is clean and free of foreign material.

Clean the surface.

Repeat on the other side.

 

Accessory installation

70
IMG-378415
 
71
IMG-378423
 

Note!
Note the position.

Repeat on the other side.

72
IMG-378424
 

Note!
This step is easier with two people.


Note!
Only tighten the bolts finger tight at this stage.

Install the screws.

Repeat on the other side.

73
IMG-378425
 

Repeat on the other side.

74
IMG-378427
 

Repeat on the other side.

 

Installation

75
IMG-260929
 
76
IMG-259865
 

Install the clip(s).

 

Vehicles with 4 cyl diesel engine

77
IMG-378224
 

Caution!
Make sure that the exhaust flexible pipe is not forcibly bent or twisted.


Note!
Always use new seals, screws and nuts.

Install the nuts

 

Vehicles with 4-cyl gasoline engine

78
IMG-378225
 

Caution!
Make sure that the exhaust flexible pipe is not forcibly bent or twisted.


Note!
Always use new seals, screws and nuts.

Install the nuts

 

Vehicles with 5-cyl diesel engine

79
IMG-378222
 

Caution!
Make sure that the exhaust flexible pipe is not forcibly bent or twisted.


Note!
Always use new seals, screws and nuts.

Install the nuts

 

Vehicles with 2WD

80
IMG-259871
 

Install the screw.


Tightening torque: M10 , 50 Nm

81
IMG-259874
 
 

All vehicles

82
IMG-259875
 

Use: , Rust inhibitor, low viscosity

Repeat on the other side.

83
IMG-259876
 

Install the screws.

Repeat on the other side.

84
IMG-282983
 

Caution!
Take extra care not to damage the wiring harnesses.

Install the screw.

85
IMG-364322
 

Install the panel.

86
IMG-259879
 

Install the panel.

87
IMG-259881
 

Reinstall the screws.

 

Accessory installation

88
IMG-378443
 

Locate relevant marking.

89
IMG-378444
 

Apply tape to the other side, opposite the marking lines.

90
IMG-378446
 
91
IMG-378447
 

Deburr edges

 

Vehicles with R-design

92
IMG-378452
 

Locate relevant marking.

93
IMG-378453
 

Apply tape to the other side, opposite the marking lines.

94
IMG-378456
 
95
IMG-378457
 

Deburr edges

 

All vehicles

96
IMG-377070
 

Install tow bar connector and wiring harness according to installation instruction: Towbar, Wiring and Control Unit.

Reinstall the removed parts in reverse order.