Workshop installation recommended
Excl. AU, BR, CN, JP, MX
Op. No.: 89208
With the electrically folding towbar you do not have to stretch beneath the car to detach or remove the towbar. Pressing a button in the luggage compartment fold the towbar out. A simple hand movement positions the towbar in a locked position.
For increased safety there is a light indicator on the button that indicates that the towbar is locked. If the towbar is unlocked a warning message is shown in the car's combined instrument panel.
The trailer module manages the electronic communication between the vehicle and trailer.
With the help of the light control function in the car's display, the lamps on the trailer illuminate in a sequence which makes it easier to check the lighting.
If, when driving, there is a fault or problem with the trailer's direction indicators or brake lights, the trailer module immediately sends the driver information.
The towbar is equipped with the "Fix4Bike" system. It allows the installation of future accessories specially prepared for "Fix4Bike".
The towbar is equipped with Volvo's Trailer Stability Assist-technology (TSA) and interacts with your Volvo's DSTC-system1. If the trailer starts to sway back and forth at speeds in excess of 30 mph (50 km/h), TSA can brake one or more wheels to regain stability and maintain control.
Each Volvo towbar has been designed for your Volvo. They are an integral part of the car's body and have been tested to ensure that they meet the most stringent safety and function demands.
|31458008||Including electrical cable kit with 13-pin connection||Installation Instruction|
|31453060||In combination with electrically operated seat lowering|
|31399328||In combination with mechanically operated seat lowering|
Facts and advantages
Thoroughly tested both in the laboratory and on the test track to fulfill Volvo's strict requirements for quality and durability.
Approved according to EU directive ECE R55.
Surface treated in several stages for the best corrosion resistance.
The towbar's ball neck is made of steel with a zinc-nickel coating.
The mounting for the safety wire is integrated in the towbar's ball neck, and thus easily accessible.
The electrical socket is integrated in the towbar's ball neck.
Clear markings for cutting the bumper.
The trailer module is compatible with trailers with LED lighting.
Control function of trailer lighting, which makes it possible to control the trailer lighting in a controlled sequence.
The towbar is supplied complete with certification sheet and is ready to install.
Max. towing capacity:
Max. ball pressure:
The towbar is tested for the maximum towing weight and towball load, but depending on the car version, it may be lower. For precise information, see the car's owner's manual or contact your local Volvo dealer.
- Dynamic Stability and Traction Control.
- Ordered according to separate procedures and downloaded using VIDA.