Plug-in Hybrid, BR, EUR, NOR
The extra charging cable makes your everyday life more flexible and comes with different connectors to fit your specific needs.
Charging of the car is monitored by two-way communication between the car and the control box. When the cable is connected to the power source, self-test diagnostics are performed to ensure that the cable is properly connected and is ready to supply the car with power. Charging is done via a charging cable of either type Mode 2 or Mode 3. The control and safety functions are the same for both, but the location of the control box and the design of the cable differ.
A 7 metre charging cable is useful in situations when you cannot park the car near a charging point.
Charging with Mode 2. The control box is integrated in the charging cable and plugged into an ordinary power socket.
Charging with Mode 3. The control box is secured in a charging station connected to the mains supply. The charging cable does not require any logic to control charging, but has a special connector (Type 2) for connection to the control box.
Schuko connector (Mode 2), Image 2
|32257795||7 metres, Max 6 A|
IEC 60309 1P-16A blue plug (Mode 2), Illustration 3
|32257800||7 metres, Max. 16 A, 1-phase, Excl. NO|
IEC 60309 3P-16A red plug(Mode 2), Illustration 3
|32324390||6 metres, Max. 16 A, 3-phase, Excl. NO|
Type 2 connector (Mode 3), Image 4
|32257777||7 metres, Max. 16 A, 1-phase, Excl. BR|
|32324391||6 metres, Max 16 A, 3-phase|
Facts and advantages
The cable must not be repaired or spliced as this can affect its safety and function.
IP6K7 protection rated.
The cable can withstand a load of 500 kg in the event of being driven over.
The control box does not power the cable until it is correctly connected and the car is ready to receive current.
The cable's control box has an integrated earth fault circuit breaker. In the event of an earth fault, the current is switched off.
(The image does not provide an exact reproduction for all markets.)