Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S60 2015
S60 (11-18) 2015

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313593921.431373770, 31373462, 31338929, 31338931, 31338930, 31373461, 31373460, 31373459
Diffuser




IMG-374989




 

Special tools

 

999 7234 Hole stamp

Tool number:999 7234

Tool description:Hole stamp

Tool boards:80


Materials

Designation

Part number

Isopropanol

1161721

Activator

8637076


Equipment
IMG-345497
IMG-239660
IMG-240693

IMG-375101


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

When installing, the car must retain a temperature of 20 degrees C.

After installation, the car must not be washed for 48 hours

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Applies to unpainted component

4
IMG-377406
 
5
IMG-377315
 

Caution!
First the paint must dry after painting.

Clean the surface.

Use: 1161721, Isopropanol

6
IMG-377404
 

Remove the protective film.

7
IMG-377405
 

Install component that comes with the accessory kit.

 

All vehicles

 

Removal

8
IMG-374993
 

Remove the screws.

Remove the clips.

9
IMG-374999
 

Detach the panel.

On both sides.

Use: Interior trim remover

 

Vehicles with parking assistance

10
IMG-375029
 

Note!
The graphic shows the back of the component before removal.

The part is to be reused.

11
IMG-375009
 

Remove the panel.

 

Accessory installation

12
IMG-375359
 
13
IMG-375357
 

Locate relevant marking.

Measure and mark as illustrated.

14
IMG-375364
 
15
IMG-375369
 


Use special tool: T9997234, Hole stamp

Remove the swarf.

16
IMG-375376
 

Clean the surfaces.

Allow to dry.

Use: 1161721, Isopropanol

17
IMG-353519
 

Clean the surfaces.

Use: 1161721, Isopropanol

Allow to dry.

18
IMG-375378
 

Apply a thin and even layer.

Use: 8637076, Activator

Allow to dry for at least 10 minutes.

19
IMG-353518
 

Apply a thin and even layer.

Use: 8637076, Activator

Allow to dry for at least 10 minutes.

20
IMG-353515
 
21
IMG-340202
 

Note!
Prepare and install one holder at a time.

22
IMG-340690
 
23
IMG-375400
 

Note!
Ensure that the tape is fixed to the surface.

 

Removal

24
IMG-375013
 

Remove the screws.

Remove the clips.

On both sides.

25
IMG-375034
 

The part is to be reused.

 

Accessory installation

26
IMG-375019
 

Install component that comes with the accessory kit.

On both sides.

 

Installation

27
IMG-375039
 

Reinstall the removed part.

On both sides.

28
IMG-375061
 

Install the screws.

Install the clip(s).

On both sides.

 

Vehicles with fixed towbar

29
IMG-376088
 

Locate relevant marking.

Use: Air-powered keyhole saw

Remove the swarf.

 

Vehicles with detachable towbar

30
IMG-377003
 

Note!
Do not use the uppermost line of the actual markings.

Locate relevant marking.

31
IMG-376820
 

Apply tape to the other side, opposite the marking lines.

32
IMG-376938
 

Note!
Saw in the radius between the existing marking lines.

33
IMG-376090
 

Caution!
Be extra careful when removing or installing this component.

Use: Air-powered keyhole saw

Remove the swarf.

 

Vehicles with parking assistance

34
IMG-375066
 
 

Accessory installation

 

Vehicles without Integrated Exhaust End Pipes

35
IMG-376790
 
36
IMG-376782
 
 

All vehicles

37
IMG-375059
 
38
IMG-375063
 

Reinstall the screws.