Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V90 Cross Country 2018
V543 2018

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
322619601.032261953, 32261954
Tablet holder (tablet without charging)




 
Equipment
A0000162

IMG-463739


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-440436
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

4
 

Note!
The removal steps may contain installation details.

5
IMG-394535
 

Turn off the ignition.

6
IMG-394500
 

Move marked component forward.

7
IMG-394038
 

Remove the screws.

8
IMG-394018
 

Note!
The graphic shows the back of the component before removal.

9
IMG-394039
 

Note!
Perform the procedure one side at a time.

10
IMG-394056
 
11
IMG-462934
 

Note!
Orientation view

12
IMG-462933
 

Remove the part carefully

Fold marked part aside.

13
IMG-463001
 

Release the catches.

Remove the marked part.

14
IMG-403751
 

Note!
The graphic shows the back of the component before removal.

15
IMG-403745
 

Remove the marked part.

16
IMG-463560
 

Release the catches.

Remove the marked detail/details.

17
IMG-463569
 

Release the catches.

Remove the marked part.

 

Accessory installation

18
IMG-463577
 

Install component that comes with the accessory kit.

A click confirms that the component is in the correct position.

19
IMG-463736
 

Assemble components that come with the accessory kit.

Repeat on the other side.

20
IMG-463600
 

Note!
The image shows head restraint without cushion.

Adjust the position of the component according to image.

21
IMG-463738
 

Caution!
Check that the component has locked in its bottom position.

22
IMG-459273
 

Note!
Make sure that the backrest upholstery touches the head restraint, showing no space in between.

Compare with upholstery and head restraint on the other front seat.

23
IMG-462926
 

Note!
Make sure that the backrest upholstery touches the head restraint, showing no space in between.

Compare with upholstery and head restraint on the other front seat.

If adjustment is necessary, follow the procedure described in the method step below.

24
IMG-407341
 

Caution!
Press the foam padding upward against the upholstery.

 

Installation

25
 

Reinstall the removed parts in reverse order.

26
 

Repeat the steps when removing on opposite side.

Repeat the steps when installing accessories on opposite side.