Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 2015
V60 (-18) 2015

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
322709071.132270866
Digital radio, DAB




 

Special tools

 

951 2620 Stripping tool (for wiring)

Tool number:951 2620

Tool description:Stripping tool (for wiring)

Tool boards:39

 

951 2785 Crimping tool (included in 9512669)

Tool number:951 2785

Tool description:Crimping tool (included in 9512669)

Tool boards:39

 

951 2777 Hot-air gun

Tool number:951 2777

Tool description:Hot-air gun

Tool boards:08



IMG-460759

IMG-461221

IMG-461536


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
IMG-400004
 

Caution!
Attach the antenna wires using tape. Cable ties or similar must not be used.


Caution!
Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.


Note!
For vehicles without TV receiver, rear right side window needs to be replaced.

 

Color symbols

3
IMG-400010
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

4
IMG-342372
 

Repeat on the other side.

5
IMG-360124
 

Remove the marked part.

Disconnect any connector(s).

6
IMG-344986
 
7
IMG-400820
 

Loosen the marked detail.

8
IMG-400821
 

Loosen the marked detail.

9
IMG-400822
 

Remove the marked part.

10
IMG-400815
 

Remove the panel.

11
IMG-400816
 

Remove the screw.

12
IMG-343417
 

Remove the panel.

13
IMG-461229
 

Detach the panel.

14
IMG-341906
 

Remove the marked part.

15
IMG-461556
 

Detach the panel.

Fold the carpet aside.

16
IMG-351651
 
17
IMG-391390
 
18
IMG-461588
 

Note!
The clips consist of two parts.

Remove the panel.

Check that the fasteners are undamaged before installation. If not, they must be replaced with new ones.

19
IMG-461286
 

Remove the panel.

20
IMG-461288
 
21
IMG-461289
 

Remove the screws.

22
IMG-461228
 

Remove the screw.

23
IMG-391570
 

Remove the marked part.

24
IMG-342318
 

Remove the marked part.

25
IMG-461558
 

Remove the screws.

Remove the panel.

26
IMG-343425
 

Remove the panel.

Disconnect the connector.

 

Vehicles with TV-receiver

27
IMG-400000
 

Replace rear right side window according to VIDA service information.

Information/ Repair/ Removal, replacement, installation/ 8 Body and interior/ 84 Exterior trim, glass, weatherstrips/ 844 glass for side doors and window/ Fixed side window

28
IMG-462451
 

The connector is not to be used.

Use tape

 

All vehicles

29
IMG-344926
 

Remove the panel.

Disconnect the connector, if applicable.

30
IMG-344927
 

Remove the weatherstrip.

31
IMG-344928
 

Caution!
The front and upper sill panel must be removed and installed as one unit.

32
IMG-344929
 
33
IMG-344930
 
34
IMG-340979
 
35
IMG-340980
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

36
IMG-303005
 
37
IMG-303006
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

38
IMG-400002
 

Remove the battery's negative cable.

 

Alternative 1

39
IMG-380657
 
 

Alternative 2

40
IMG-380655
 
41
IMG-380656
 
 

All vehicles

42
IMG-329151
 
43
IMG-373198
 

Note!
Orientation view

44
IMG-329209
 

Loosen the screws.

Disconnect the connector.

45
IMG-382639
 

Disconnect the connector, if applicable.

46
IMG-329153
 

Caution!
Be extra careful when removing or installing this component.

47
IMG-460418
 

Remove the screws.

Loosen the marked detail.

 

Vehicles with High Performance Sound

48
IMG-460425
 

Disconnect the connector.

 

Vehicles with Premium Sound

49
IMG-460422
 

Disconnect the connector.

 

All vehicles

50
IMG-460609
 

Note!
Orientation view

 

Accessory installation

51
IMG-460610
 

Loosen the tape temporarily.

The item is to be reused.

52
IMG-460611
 
53
IMG-460426
 


Use special tool: T9512620, Stripping tool (for wiring)

54
IMG-460764
 

Use detail according to image.

55
IMG-460428
 


Use special tool: T9512620, Stripping tool (for wiring)

56
IMG-460373
 
57
IMG-460547
 


Use special tool: T9512785, Crimping tool (included in 9512669)

58
IMG-460375
 

Caution!
Make sure that the surrounding components are protected from heat.


Use special tool: T9512777, Hot-air gun

59
IMG-460376
 
60
IMG-460660
 
61
IMG-460520
 

Connect the connectors.

62
IMG-461499
 

Fold the carpet aside.

63
IMG-461501
 

Remove the screw.

64
IMG-461502
 

Connect the ground cable.

Reinstall the screw.

65
IMG-461503
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

66
IMG-461506
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

67
IMG-461500
 

Fold the floor carpet back.

68
IMG-460843
 

Caution!
Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

Place the overlap of the cable mat under the amplifier.

Reinstall the removed part.

Reinstall the screws.


Tightening torque: M6 , 10 Nm

69
IMG-460480
 

Assemble components that come with the accessory kit.

70
IMG-460484
 

Install component that comes with the accessory kit.

71
IMG-461563
 
72
IMG-461564
 
73
IMG-461565
 
74
IMG-461566
 

Install component that comes with the accessory kit.

75
IMG-461567
 

Fold the insulation aside.

76
IMG-461509
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

77
IMG-461518
 

Pull the wiring harness through.

Refit the insulation.

78
IMG-461519
 

Connect the connectors.

 

Removal

79
IMG-461422
 

Remove the clips.

Remove the marked part.

 

Vehicles with TV-receiver

80
IMG-461521
 

Remove the marked part.

 

Vehicles with TV-receiver

81
IMG-461455
 

Disconnect the connectors.

Remove the screw.

Remove the marked part.

 

All vehicles

 

Accessory installation

82
IMG-461423
 

Install components that come with the accessory kit.


Tightening torque: M6 , 10 Nm

83
IMG-461434
 

Connect the connector.

84
IMG-460766
 

Use details according to image.

85
IMG-460546
 

Assemble components that come with the accessory kit.

Depress the secondary lock.

 

Vehicles with TV-receiver

86
IMG-461457
 

Connect the connector.

Install component that comes with the accessory kit.

 

Vehicles with TV-receiver

87
IMG-461458
 

Install component that comes with the accessory kit.

 

All vehicles

88
IMG-461425
 

Caution!
Attach the antenna wires using tape. Cable ties or similar must not be used.

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

89
IMG-461150
 

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

90
IMG-461524
 

Fold the insulation aside.

91
IMG-461152
 

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

92
IMG-461531
 

Pull the wiring harness through.

Refit the insulation.

Connect the connector.

93
IMG-461534
 

Caution!
Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

Position the cable harness excess as illustrated.

Install the wiring harness.

Use tape

94
 

Reinstall the removed parts in reverse order.

95
IMG-400003
 

Reinstall the battery's negative cable.

96
IMG-400006
 

Order and download software according to VIDA/SOFTWARE.

Order and download software according to: 31268617

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31285168