| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
| | There may be parts in the accessories kit that are not needed for this installation. |
| | |
|  | | IMG-400010 |
|
| | Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps. |
Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components. Used for accessory components.
|
| | |
|  | | IMG-426135 |
|
| | |
| | |
| | Note!
The removal steps may contain installation details. |
|
|  | | IMG-420320 |
|
| | |
|  | | IMG-407110 |
|
| | |
|  | | IMG-414611 |
|
| | |
|  | | IMG-415830 |
|
| | Repeat on the other side. |
|  | | IMG-415831 |
|
| | Remove the screw. Repeat on the other side.
Tightening torque: M6
, 10 Nm
|
|  | | IMG-436015 |
|
| | |
|  | | IMG-436020 |
|
| | |
|  | | IMG-425291 |
|
| | Remove the screws.
Tightening torque: M5
, 5 Nm
|
|  | | IMG-436024 |
|
| | |
|  | | IMG-414411 |
|
| | Release the lock. Repeat on the other side. Remove the marked part. |
|  | | IMG-453414 |
|
| | Caution!
Make sure that the seat backrest upholstery (fold down position) is not damaged by contact with the floor! |
|
|  | | IMG-451542 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-451557 |
|
| | Remove the marked part. Repeat on the other side. |
|  | | IMG-414995 |
|
| | Fold marked part aside. Remove the screw.
Tightening torque: Seat belt guide, to Bracket
, 4.4 Nm
Repeat on the other side. |
|  | | IMG-451563 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-451565 |
|
| | Remove the part carefully Fold marked part aside. Repeat on the other side. |
|  | | IMG-415048 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-415049 |
|
| | Release the catch. Remove the marked part. Repeat on the other side. |
|  | | IMG-414482 |
|
| | Remove the panel. Repeat on the other side. |
|  | | IMG-446025 |
|
| | |
|  | | IMG-411349 |
|
| | Fold marked part aside. Repeat on the other side. |
|  | | IMG-411350 |
|
| | Remove the marked part.
Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304
|
|  | | IMG-411351 |
|
| | Remove the screw.
Tightening torque: Cargo anchor, to body
, 24 Nm
|
|  | | IMG-452912 |
|
| | |
|  | | IMG-446380 |
|
| | Note!
The number of connectors may vary depending on the vehicle's equipment level. |
The graphic shows the back of the component. Disconnect the connectors. |
|  | | IMG-452906 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-452909 |
|
| | |
|  | | IMG-453429 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-453426 |
|
| | |
|  | | IMG-453436 |
|
| | Disconnect the connector. |
|  | | IMG-453451 |
|
| | Remove the marked part.
Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304
|
| | | IMG-411351 |
|
| | Remove the screw.
Tightening torque: Cargo anchor, to body
, 24 Nm
|
|  | | IMG-453470 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-453473 |
|
| | |
|  | | IMG-453476 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-453482 |
|
| | |
|  | | IMG-436461 |
|
| | Remove the panel. Disconnect the connector, if applicable. Repeat on the other side. |
|  | | IMG-453487 |
|
| | Remove the panel. Repeat on the other side. |
|  | | IMG-417440 |
|
| | Remove the panel. Disconnect the connector, if applicable. Repeat on the other side. |
|  | | IMG-430095 |
|
| | Remove the screws. Remove the panel. |
|  | | IMG-430100 |
|
| | |
|  | | IMG-430105 |
|
| | Remove the marked part. Use hands only. |
|  | | IMG-423045 |
|
| | Remove the cable harness clips. Disconnect the connectors. |
|  | | IMG-401581 |
|
| | Remove the screws. Repeat on the other side.
Tightening torque: Front seat to body
, 40 Nm
|
|  | | IMG-417510 |
|
| | Repeat on the other side. |
|  | | IMG-401583 |
|
| | Remove the screws. Repeat on the other side.
Tightening torque: Front seat to body
, 40 Nm
|
|  | | IMG-401584 |
|
| | Repeat on the other side. |
|  | | IMG-396605 |
|
| | Disconnect the connector. Repeat on the other side. |
|  | | IMG-396606 |
|
| | Unhook the cable harness clips. Repeat on the other side. |
|  | | IMG-453522 |
|
| | Repeat on the other side. |
|  | | IMG-416201 |
|
| | Remove the screws. Fold marked part aside.
Tightening torque: M6
, 10 Nm
|
|  | | IMG-430165 |
|
| | Remove the marked part. Repeat on the other side. |
|  | | IMG-418163 |
|
| | |
|  | | IMG-436466 |
|
| | |
|  | | IMG-436467 |
|
| | Loosen the component indicated. Do not remove it. |
|  | | IMG-401580 |
|
| | |
| | Disconnecting the battery |
|  | | IMG-400002 |
|
| | Remove the battery's negative cable. |
| | Vehicles with driver's knee airbag |
|  | | IMG-430145 |
|
| | |
|  | | IMG-430147 |
|
| | Remove the screws.
Tightening torque: Airbag to bracket
, 5.5 Nm
|
|  | | IMG-430150 |
|
| | Warning!
Take extra care when handling supplemental restraint system (SRS) components. |
Remove the marked part. |
|  | | IMG-430160 |
|
| | Note!
The number of connectors may vary depending on the vehicle's equipment level. |
Release the connector catches. Disconnect the connectors. |
| | |
|  | | IMG-422105 |
|
| | Remove the screws. Loosen the marked detail. |
|  | | IMG-430167 |
|
| | Disconnect the connector. Remove the panel. |
|  | | IMG-394096 |
|
| | Remove the marked part. The part is to be reused. |
|  | | IMG-394081 |
|
| | Remove the screw. The part is to be reused.
Tightening torque: Accelerator pedal, to Floor
, 6.5 Nm
|
|  | | IMG-394105 |
|
| | |
|  | | IMG-394078 |
|
| | Release the connector's catch. Disconnect the connector. |
|  | | IMG-454222 |
|
| | |
|  | | IMG-453661 |
|
| | Remove the screw.
Tightening torque: M5
, 5 Nm
|
|  | | IMG-453662 |
|
| | |
|  | | IMG-453663 |
|
| | |
|  | | IMG-453664 |
|
| | Release the cable. Remove the marked part. |
|  | | IMG-430172 |
|
| | |
|  | | IMG-454134 |
|
| | |
|  | | IMG-454141 |
|
| | Depress the locking devices. Remove the marked part. |
|  | | IMG-453741 |
|
| | Fold marked part aside. Repeat on the other side. |
|  | | IMG-453742 |
|
| | |
|  | | IMG-453667 |
|
| | Fold marked part aside. Remove the marked part. |
|  | | IMG-453665 |
|
| | |
|  | | IMG-453669 |
|
| | Remove the marked detail/details. |
|  | | IMG-453743 |
|
| | |
|  | | IMG-453744 |
|
| | Remove the marked detail/details. |
|  | | IMG-453758 |
|
| | Remove the nuts.
Tightening torque: Windshield wiper arm
, 38 Nm
|
|  | | IMG-453760 |
|
| | Remove the marked part.
Use special tool: T9997515, Puller
Repeat on the other side. |
|  | | IMG-452200 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-452199 |
|
| | Remove the marked part.
Use special tool: T9997077, Jimmy bar
Repeat on the other side. |
|  | | IMG-449095 |
|
| | Remove the clips. Remove the marked part. Repeat on the other side. |
|  | | IMG-449121 |
|
| | Remove the clips. Repeat on the other side. |
|  | | IMG-449127 |
|
| | Remove the screws.
Tightening torque: M6
, 10 Nm
|
|  | | IMG-449161 |
|
| | |
|  | | IMG-449162 |
|
| | Loosen the marked detail. |
|  | | IMG-453877 |
|
| | Loosen the marked detail. |
|  | | IMG-453773 |
|
| | |
|  | | IMG-429293 |
|
| | Remove the marked part. The part is not to be reused. |
|  | | IMG-452261 |
|
| | |
|  | | IMG-453331 |
|
| | Remove the nut.
Tightening torque: M6
, 10 Nm
|
|  | | IMG-419538 |
|
| | Release the locks. Fold marked part aside. |
|  | | IMG-419543 |
|
| | Release the connector's catch. Disconnect the connector. |
|  | | IMG-419572 |
|
| | Remove the screws. Fold marked part aside. |
|  | | IMG-420636 |
|
| | Remove the screws. Remove the nut.
Tightening torque: M8
, 24 Nm
|
|  | | IMG-420638 |
|
| | |
| | |
|  | | IMG-453862 |
|
| | Depress the locking device. Remove the marked part. |
|  | | IMG-436276 |
|
| | Remove the nut. Fold marked part aside.
Tightening torque:
,
|
|  | | IMG-440116 |
|
| | Release the catches. Fold marked part aside. |
|  | | IMG-389347 |
|
| | |
|  | | IMG-452781 |
|
| | |
|  | | IMG-389348 |
|
| | |
|  | | IMG-452785 |
|
| | Install component that comes with the accessory kit. |
|  | | IMG-453945 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-453947 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-453951 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-454248 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-454041 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-454247 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-454074 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-454078 |
|
| | |
|  | | IMG-454081 |
|
| | Position/route the cable as illustrated. Install the cable. Use tape |
|  | | IMG-454083 |
|
| | |
|  | | IMG-454092 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-454116 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-402640 |
|
| | |
|  | | IMG-388638 |
|
| | |
|  | | IMG-445619 |
|
| | Connect the prerouted cable. Install the nut.
Tightening torque: M6
, 10 Nm
|
|  | | IMG-402648 |
|
| | |
|  | | IMG-454126 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-422525 |
|
| | |
|  | | IMG-422564 |
|
| | Depress the locking device. Release the connector's catch. |
|  | | IMG-419701 |
|
| | Depress the locking device. Remove the marked part. |
|  | | IMG-452746 |
|
| | Connect the cable harness terminals in the connector as follows. |
|  | | IMG-430590 |
|
| | |
|  | | IMG-419427 |
|
| | Release the lock. Release the connector's catch. |
|  | | IMG-419435 |
|
| | Release the catches. Remove the marked part. |
|  | | IMG-452312 |
|
| | |
|  | | IMG-454226 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-454242 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie Use tape |
|  | | IMG-454228 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-454230 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie Position the cable harness excess as illustrated. |
|  | | IMG-430606 |
|
| | |
|  | | IMG-454232 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-454180 |
|
| | |
|  | | IMG-429291 |
|
| | Make a hole, using the tool indicated. Pull the wiring through. Use: Welding rod
|
|  | | IMG-452329 |
|
| | Make a hole, using the tool indicated. Pull the wiring through. Use: Welding rod
|
|  | | IMG-454181 |
|
| | Install component that comes with the accessory kit. |
|  | | IMG-453116 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-452337 |
|
| | |
|  | | IMG-419482 |
|
| | Disconnect the connector. |
|  | | IMG-419490 |
|
| | |
|  | | IMG-419491 |
|
| | Depress the locking device. Remove the marked part. |
|  | | IMG-452454 |
|
| | Connect the cable harness terminals in the connector as follows. |
|  | | IMG-453340 |
|
| | Position/route the cable as illustrated. |
|  | | IMG-454233 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-452522 |
|
| | Make a hole, using the tool indicated. Pull the wiring through. Use: Welding rod
|
|  | | IMG-452587 |
|
| | Connect the cable harness terminals in the connector as follows. |
|  | | IMG-452604 |
|
| | Install component that comes with the accessory kit. |
| | Reinstall the removed parts in reverse order. |
|  | | IMG-400006 |
|
| | Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number. |
|  | | IMG-424469 |
|
| | |
|  | | IMG-424470 |
|
| | Check for correct operation. |
