Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V90 Cross Country 2018
V543 2018

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314708181.031664736
Media Server (Vehicles with Digital TV)




 

Special tools

 

951 2631 Terminal removal tool (Color code: Brown)

Tool number:951 2631

Tool description:Terminal removal tool (Color code: Brown)

Tool boards:39

 

951 2620 Stripping tool (for wiring)

Tool number:951 2620

Tool description:Stripping tool (for wiring)

Tool boards:39

 

951 2785 Crimping tool (included in 9512669)

Tool number:951 2785

Tool description:Crimping tool (included in 9512669)

Tool boards:39

 

951 2777 Hot-air gun

Tool number:951 2777

Tool description:Hot-air gun

Tool boards:08


Equipment
A0000162
IMG-239664
IMG-240693

IMG-423819

IMG-424337


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

3
IMG-394535
 
 

Removal

4
 

Note!
The removal steps may contain installation details.

5
IMG-411070
 
6
IMG-424855
 
7
IMG-414614
 

Remove the panel.

8
IMG-414995
 

Fold marked part aside.

Remove the screw.


Tightening torque: Seat belt guide, to Bracket , 4.4 Nm

9
IMG-415046
 

Note!
The graphic shows the back of the component before removal.

10
IMG-415047
 

Remove the panel.

Use hands only.

11
IMG-415049
 

Release the catch.

Remove the marked part.

12
IMG-418525
 

Remove the screw.


Tightening torque: Cargo anchor, to body , 13 Nm

13
IMG-425211
 

Remove the screw.


Tightening torque: Safety belt lower anchor to body (rear) , 40 Nm

14
IMG-407110
 
15
IMG-414611
 

Remove the marked part.

16
IMG-415830
 

Repeat on the other side.

17
IMG-415831
 

Remove the screw.


Tightening torque: M6 , 10 Nm

Repeat on the other side.

18
IMG-425191
 

Lift the marked component up

19
IMG-425125
 

Release the lock.

20
IMG-425190
 

Remove the marked part.

21
IMG-416087
 

Remove the marked part.

 

Vehicles with keyless entry

22
IMG-424841
 

Release the catch.

Loosen the component indicated. Do not remove it.

 

All vehicles

23
IMG-415835
 

Remove the screws.

24
IMG-416089
 

Remove the marked part.

25
IMG-418545
 

Remove the panel.

Disconnect any connector(s).

26
IMG-425929
 

Disconnect the connectors.

27
IMG-423455
 

Remove the nut.

28
IMG-425937
 

Remove the nuts.

Remove the marked part.

29
IMG-423458
 

Remove the screws.

Remove the marked part.

The part is not to be reused.

 

Accessory installation

30
IMG-423459
 
31
IMG-425939
 

Place the component where indicated in the graphic.

Install the nuts

32
IMG-423530
 

Install the nut.


Tightening torque: M6 , 10 Nm

33
IMG-423030
 

Adjust the component to a horizontal position.

34
IMG-423329
 

Position/route the cable as illustrated.

Connect the connector.

35
IMG-425927
 

Connect the connectors.

36
IMG-425945
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

37
IMG-425947
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

38
IMG-425948
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

39
IMG-425513
 

Remove the battery's negative cable.


Tightening torque: Battery cable for battery , 6 Nm

40
IMG-423576
 

Remove the marked part.

41
IMG-416273
 

Remove the nut.

Fold marked part aside.

42
IMG-416275
 

Release the catches.

Fold marked part aside.

43
IMG-389347
 

Remove the marked part.

 

Vehicles with Alcohol Analysing Start Inhibitor

44
IMG-425031
 

Remove the marked part.

45
IMG-425032
 


Use special tool: T9512631, Terminal removal tool (Color code: Brown)

46
IMG-425034
 

Note!
On some vehicles the Red/Yellow wire might be only Red.

47
IMG-425035
 

Remove the terminal. Use the wire only.

48
IMG-425239
 
49
IMG-425040
 


Use special tool: T9512620, Stripping tool (for wiring)

50
IMG-425039
 
51
IMG-425037
 
52
IMG-425049
 


Use special tool: T9512785, Crimping tool (included in 9512669)

53
IMG-425051
 

Caution!
Make sure that the surrounding components are protected from heat.


Use special tool: T9512777, Hot-air gun

 

All vehicles

54
IMG-423829
 

Connect the prerouted cable.

55
IMG-389348
 

Reinstall the removed part.

56
IMG-423830
 

Install the cable.

Use a cable tie

57
IMG-416277
 

Reinstall the removed part.

58
IMG-422785
 

Install component that comes with the accessory kit.

59
IMG-423477
 

Position/route the cables as illustrated.

Install the cables.

Use a cable tie

60
IMG-424621
 

Connect the prerouted cables.

BK = Black

RD = Red

61
IMG-424623
 

Depress the secondary lock.

62
IMG-422801
 

Route the wires adjacent to existing wirings.

Install the cables.

Use a cable tie

63
IMG-423586
 

Note!
Orientation view

 

Alternative 1

64
IMG-423587
 

Remove the nut.

65
IMG-423588
 

Connect the prerouted cable.

Install the nut.


Tightening torque: M6 , 10 Nm

 

Alternative 2

66
IMG-423884
 
67
IMG-423828
 

Remove the nut.

68
IMG-423826
 

Connect the cable.

Install the nut.


Tightening torque: M6 , 10 Nm

69
IMG-423887
 

Reinstall the removed part.

 

All vehicles

70
IMG-423879
 

Note!
Position the template so that its surfaces are aligned against the panel.

71
IMG-423836
 

Scribe/mark up

72
IMG-423840
 

Make a hole, using the tool indicated.

73
IMG-423849
 
74
IMG-423881
 

Caution!
The decal must face upward.

75
IMG-423880
 

Install the nut.

Tighten the nut.

Use hands only.

76
IMG-422988
 

Connect the prerouted cable.

77
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.

78
IMG-422420
 

Place the manual for this accessory in a suitable location in the car.

 

Installation

79
IMG-400000
 

Reinstall the removed parts in reverse order.