Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V90 Cross Country 2018
V543 2018

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
314087761.231408769
Side scuff plate




 

Materials

Designation

Part number

Isopropanol

1161721

Masking tape

Paint primer

1161727


Equipment
IMG-239681
IMG-239940

IMG-420664


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Preparation

3
IMG-420673
 

Clean the surface.

Allow to dry.

Use: 1161721, Isopropanol

4
IMG-423741
 

Masking

Use: , Masking tape

5
IMG-421573
 

Apply a thin and even layer.

Use: 1161727, Paint primer

Allow to dry for at least 5 minutes but not more than 30 minutes.

6
IMG-423741
 

Remove the tape.

7
 

Repeat all method steps for the other side.

 

Accessory installation

8
IMG-420694
 

Fold the protective film forward

To be repeated in the other end of the component.

9
IMG-424875
 

Caution!
Take extra care not to damage the edges of the component.

10
IMG-420691
 

Note!
This step is easier with two people.


Note!
Make sure that the component is centred.

Place the component where indicated in the graphic.

11
IMG-420695
 

Caution!
Pull carefully.


Note!
This step is easier with two people.

Remove the protective film.

12
IMG-421560
 

Note!
Press and apply pressure to the part over the tape for at least 20 seconds.

13
IMG-423145
 

Press the marked component.

Use a drill with the stated size

14
IMG-420696
 

Install component that comes with the accessory kit.

15
 

Repeat the steps when installing accessories on opposite side.