Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V70 2009
V70 (08-) 2009

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
307218831.130721881
Load compartment divider, longitudinal




IMG-278984




 
Equipment
A0000162

IMG-278985

IMG-213320


 
  

INTRODUCTION

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 
1
IMG-278991
 

  • Before installing, pull out/slide in the rear part of the cargo compartment separator so that dimension A is 430 mm (16 15/16").

2
IMG-278992
 

  • Position the cargo compartment wall with the clamps into the car.

  • Open the upper clamp and affix it loosely on the top bar of the safety grille.

  • Open the lower clamp and affix it as illustrated. Tighten the clamps only exactly as much as necessary to grip the grille, do not tighten them yet.

3
IMG-278993
 

  • Adjust so that the cargo compartment wall is vertical and in the centre of the cargo compartment.

  • Screw the support panel (1) so that it is against the roof panel, and is parallel with it.

  • Screw down the rear support foot (2) so that the cargo compartment wall is tensioned.

  • Screw down the front support foot (3) so that the cargo compartment wall stands in a straight, vertical position.

4
IMG-278994
 

  • Tighten the knobs (1-3).

  • Check that the cargo compartment wall does not make contact with the tailgate when it closes.