Rear parking assistance

Rear parking assistance

Workshop installation recommended

Op. No.: 36687 39631

Rear parking assistance facilitates distance assessment and informs of obstructions when you have limited space behind the car, such as when parallel parking, for example.

The system is activated when reverse gear is engaged. When an object is indicated, the radio's/stereo's sound level is muted and a pulsating "buzzer tone" comes from the car's rear speakers. The tone starts to sound when approx. 150 cm remains to an obstacle and becomes a constant tone when the distance is approx. 30 cm from the rear bumper. The remaining distance is also displayed on the multimedia display in the centre console.

The kit consists of four sensors, which are practically invisible in their location in the rear bumper, as well as a control module, wiring and a button in the centre console. Parking assistance can be disabled by pressing the button in the centre console.

This system can produce "false" signals as a reaction to external sound sources with the same frequency as the system's sensors. Typical sources are the horn, wet tires on asphalt, air brakes and motorcycle exhaust pipes.

The system is disabled automatically when reversing with a trailer if TRM is installed.

The sensors are painted in the same colour as the car's bumper, except if the sensors are located in the patterned area.

Part. No.Description
3137309014-Installation Instruction
+ Control module1
Part. No.Description
3142394814-
+ Application2
Part. No.
31266966
+ Adhesive3
Part. No.
9511027
+ Glue gun4
Part. No.
9512950
+ Extra mixing tubes5
Part. No.
1161730
+ Cleaning agent
Part. No.
9192678
+ Activator6
Part. No.Description
31383983
+ Hole punching tools7
Part. No.Description
9997234Center
9997483Outer

Facts and advantages

  • Be aware of obstacles, for example, when parallel parking

Technical data

Accessory weight:

0.6 kg (1.3 lbs)

  1. The control module is not required if Front parking assistance is installed at the same time.
  2. Ordered according to separate procedures and downloaded using VIDA.
  3. Can be used for several installations. A new mixing tube must be used for each installation.
  4. Can be used for several installations.
  5. Set of 6
  6. Japan orders in accordance with a separate procedure.
  7. Hole punching tools can be used for several installations. Replace the tools with new ones when they becomes blunt.
Last updated: 4/24/2019