2025 L.H.D

Integrated running board

Integrated running board

Workshop installation recommended

Find a Dealer

Op. No.: 84136

An exclusive and stylish running board that enhances the vehicle's luxurious look. "Integrated running board" makes it easy to enter and exit the vehicle and to load the vehicle's roof.

The running board is mainly made of strong aluminum for the lowest possible weight and high strength, which can withstand 300 kg (661 lbs). The surface of the running board consists of stainless steel and everything is framed by an exterior color-matched plastic panel. To reduce the risk of slipping on the running board, rubber anti-slip protection is integrated in the metal section. The running board replaces the vehicle's standard sill moldings.

Part. No.Description
40013598Grundlackerad, 001Installation Instruction
40013608Crystal White Pearl, 707
40013613Onyx Black, 717
40013618Denim Blue, 723
40013623Platinum Grey, 731
40013628Silver Dawn, 735
40013633Bright Dusk, 736
40013638Vapour Grey, 740

Facts and advantages

  • Facilitates access to the roof when loading and unloading, washing, etc.

  • Well integrated in the lower sill area with an exclusive brushed stainless steel surface with raised rubber edges to minimize the risk of slipping.

  • Does not prevent use of the jack.

  • Withstands loads up to 300 kg (661 lbs).

Technical data

Material:

Aluminum, steel and plastic

Accessory weight:

9,7 kg (22 lbs) per side

Withstands a load of:

300 kg (661 lbs) per side

Photo:

Full version-VCC13556_Running board_Update

Note!

If the color you would like is not listed, select primed 001.

Note!

For the best finish over time, we recommend that all metal parts are cleaned and waxed on a regular basis. This is particularly important during winter due to the effects of road salt. To clean and maintain plastic parts, a special cleaning agent is recommended, which is available at your local Volvo retailer.

Last updated: 4/29/2024