Op. No.: 89208 89204
A towbar for V70, V70 R and XC70, specially developed for the North American market. The ball part is very easily handled. If you want to detach it to make room for any of our towbar-mounted accessories, you simply remove a pin.
The towbar consists of three main components: crossmember, ball holder and a ball with a diameter of 2". The car has provision in the bodywork for installation.
If you choose to not have the ball or any of our accessories installed, we have an appealing and functional protective cover (part no. 8685772) that covers the hole in the cross member.
|30682111||Ball holder 2" (50.8 mm)|
|30756689||Ball 2" (50.8 mm), Class 2|
Facts and advantages
Thoroughly tested both in the laboratory and on the test track to fulfill Volvo's strict requirements for quality and durability
Surface treated in several stages for the best corrosion resistance
The safety cable anchorage is clearly located and easily accessible
The ball section is easy to remove when the towbar is not in use
Approved to VESC V-5
16.0 kg (35 lbs)
Ball holder 2" (50.8 mm):
3.5 kg (7.7 lbs)
Ball 2" (50.8 mm), Class 2:
1.0 kg (2.2 lbs)
Max. towing capacity:
1500 kg (3300 lbs)
2" (50.8 mm) Class 2
Max. ball pressure:
75 kg (165 lbs)
The towbar is tested for the maximum towing weight and ball pressure, but this can be lower depending on the car version. For precise information, check car version and refer to the car's user manual.