Op. No.: 89142-2
A specially designed transport system for loads on the roof. The load carriers are two swept aluminum profiles and feet with full-coverage black plastic casings.
The load carriers have T-tracks for mounting accessories and the rubber moldings are designed for direct T-track mounting without the need for cutting.
The aerodynamically shaped wing profile has been optimized for minimal wind resistance and wind noise, making the vehicle journey more comfortable.
Lock kit can be installed and allows use of the same key for the load carrier and roof load accessory.
Facts and advantages
Aerodynamic wing profile with T-track.
Assembly kit containing two load carriers with mountings.
Includes torque wrenches with tightening torques.
All load carrier accessories fit:
- Ski carrier/Snowboard carrier
- Bicycle holder
- Roof box
- Kayak cradle, folding
Some load carrier accessories must be adapted to fit the T-track.
Thoroughly tested in both the laboratory and on the test track.
Aluminum with protective cover in TPE
Black with aluminum profile
Max. load capacity:
Taking the load carriers off when they are not in use saves both fuel and the environment. You also reduce the noise level in the passenger compartment.
With the load carriers installed, the height of the vehicle is increased by 13 cm (5.1 in) at the places where the load carriers are mounted. See the Owner's Manual for more dimensions.
The load carriers cannot be used in combination with "Canoe/kayak holder."
- City Crash test according to ISO 11154-5 / DIN 75302