Workshop installation recommended
Op. No.: 39631 36687
Rear Park Assist facilitates distance assessment and informs of obstructions when you have limited space behind the vehicle, for example when parallel parking.
The system is activated when reverse gear is engaged. When an object is indicated, the radio/stereo is muted and a pulsating "buzzer tone" sounds from the car's rear speakers. The tone starts to sound when approx. 150 cm remains to an obstacle and becomes a constant tone when the distance is approx. 30 cm from the rear bumper. The remaining distance is also displayed on the multimedia display in the center console.
The kit consists of four sensors that installed practically out of sight in the rear bumper, a control module, wiring and a button in the center console.
This system can produce "false" signals as a reaction to external sound sources with the same frequency as the system's sensors. Typical sources are the horn, wet tires on asphalt, air brakes and motorcycle exhaust pipes.
The system is automatically deactivated when reversing if a trailer module is installed.
The sensors are painted in the same color as the car's bumper, except if the sensors are located in the patterned area.
|31359220||-13, R-design||Installation Instruction|
Facts and advantages
Makes you aware of obstacles when parallel parking, for example
- Ordered according to separate procedures and downloaded using VIDA.
- Hole-punching tools can be used for several installations. Replace the tools with new ones when they becomes dull.