| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
| | IMG-400010 |
|
| | Note! This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps. |
Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components. Used for accessory components.
|
| | IMG-394535 |
|
| | |
| | |
| | Note! The removal steps may contain installation details. |
|
| | IMG-452115 |
|
| | |
| | IMG-383769 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-389246 |
|
| | Note! Perform the procedure one side at a time. |
Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304
|
| | IMG-383770 |
|
| | Disconnect the connector. |
| | IMG-390109 |
|
| | Remove the panel. Disconnect the connector, if applicable. |
| | IMG-452102 |
|
| | |
| | IMG-390106 |
|
| | |
| | IMG-390091 |
|
| | Disconnect the connector, if applicable. |
| | IMG-383237 |
|
| | Remove the screws. Remove the panel. |
| | Right-hand drive vehicles |
| | IMG-394096 |
|
| | Remove the marked part. The part is to be reused. |
| | IMG-394081 |
|
| | |
| | IMG-394105 |
|
| | |
| | IMG-394078 |
|
| | Disconnect the connector. |
| | |
| | IMG-397249 |
|
| | |
| | IMG-383129 |
|
| | |
| | IMG-383130 |
|
| | |
| | IMG-383134 |
|
| | |
| | IMG-396605 |
|
| | Disconnect the connector. |
| | IMG-396606 |
|
| | Unhook the cable harness clips. |
| | IMG-397252 |
|
| | |
| | IMG-454755 |
|
| | |
| | IMG-453303 |
|
| | |
| | IMG-415092 |
|
| | |
| | IMG-397280 |
|
| | |
| | IMG-397244 |
|
| | |
| | IMG-397247 |
|
| | |
| | IMG-454189 |
|
| | |
| | IMG-454188 |
|
| | On both sides. Remove the marked part. |
| | IMG-455815 |
|
| | |
| | IMG-455816 |
|
| | Remove the screw. Tightening torque: Seat belt guide, to Bracket
, 4.4 Nm
|
| | IMG-455830 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-455831 |
|
| | |
| | IMG-455836 |
|
| | Note! The graphic shows the back of the component before removal. |
|
| | IMG-455845 |
|
| | Release the catch. Remove the marked part.
|
| | IMG-414482 |
|
| | |
| | IMG-414483 |
|
| | Remove the panel. Disconnect the connector, if applicable. |
| | IMG-455881 |
|
| | |
| | IMG-455790 |
|
| | |
| | IMG-455791 |
|
| | |
| | IMG-455792 |
|
| | Remove the marked part. Disconnect the connector. |
| | IMG-455797 |
|
| | Remove the screws. Tightening torque: Sill moulding with cargo anchor
, 24 Nm
Tightening torque: Tunnel bracket, rear, to Body
, 45 Nm
|
| | IMG-455798 |
|
| | |
| | IMG-455799 |
|
| | Disconnect the connector. |
| | IMG-457138 |
|
| | Remove the clips. Check that the fasteners are undamaged before installation. If not, they must be replaced with new ones. |
| | IMG-457141 |
|
| | Release the lock. Remove the marked part.
|
| | IMG-457142 |
|
| | |
| | IMG-457153 |
|
| | |
| | IMG-446380 |
|
| | Note! The number of connectors may vary depending on the vehicle's equipment level. |
The graphic shows the back of the component. Disconnect the connectors. |
| | IMG-457155 |
|
| | Remove the screw. Loosen the clips. Fold marked part aside. |
| | IMG-457158 |
|
| | Remove the clips. Remove the marked part. |
| | IMG-457161 |
|
| | Remove the marked part. Disconnect the connector. |
| | IMG-457162 |
|
| | |
| | IMG-457164 |
|
| | Remove the clips. Remove the marked part. |
| | IMG-464545 |
|
| | Disconnect the connector. |
| | IMG-464546 |
|
| | Remove the screws. Remove the marked part. The part is not to be reused. |
| | IMG-464547 |
|
| | Remove the marked detail/details. The part is not to be reused. |
| | |
| | IMG-464552 |
|
| | Use detail according to image. |
| | IMG-464553 |
|
| | Install component that comes with the accessory kit. |
| | IMG-464554 |
|
| | Install component that comes with the accessory kit. |
| | IMG-464555 |
|
| | Install the marked component. Tighten the bolts. |
| | IMG-464557 |
|
| | Install component that comes with the accessory kit. Connect the connectors. |
| | IMG-464558 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | IMG-457168 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | IMG-457169 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | IMG-457170 |
|
| | Position the cable harness excess as illustrated. Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | IMG-457171 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | IMG-454668 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | IMG-452768 |
|
| | |
| | IMG-454670 |
|
| | Position/route the cables as illustrated. Install the cable. Use tape |
| | IMG-427425 |
|
| | |
| | IMG-454677 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | IMG-454715 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | IMG-454724 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | Right-hand drive vehicles |
| | IMG-454729 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | |
| | IMG-454725 |
|
| | Connect the connector. Position/route the cable as illustrated. Install the cable. Use a cable tie |
| | IMG-400006 |
|
| | Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number. |
| | |
| | Reinstall the removed parts in reverse order. |