Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V40 Cross Country 2016

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313303381.232270874, 32270875
Digital radio, DAB




 
Equipment
IMG-345497
IMG-239664
IMG-242205

IMG-366418


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Preparation

3
IMG-245980
 

Set the ignition key to position 0.

 

Removal

4
IMG-354413
 
5
IMG-366366
 

Remove the panel.

6
IMG-366375
 

Remove the screws.

7
IMG-356006
 

Remove the panel.

8
IMG-366506
 

Remove the part carefully

9
IMG-366502
 

Disconnect the connector.

10
IMG-366377
 
11
IMG-366386
 
12
IMG-366392
 

Remove the panel.

13
IMG-366507
 
14
IMG-366511
 

Remove the panel.

15
IMG-366513
 

Remove the panel.

 

Accessory installation

16
IMG-366539
 

Install component that comes with the accessory kit.

17
IMG-366359
 

Install component that comes with the accessory kit.

Install the screws.

18
IMG-366557
 

Note the position.

19
IMG-366551
 

Install the screw.

Install the nuts


Tightening torque: M6 , 10 Nm

20
IMG-395365
 

Locate the pre-routed connectors.

Connect the connectors.

Fasten the wiring harness using the existing clips.

 

Installation

21
IMG-377070
 

Reinstall the removed parts in reverse order.

22
IMG-242268
 

Note!
First, download the software for preparatory installation according to the accessory catalogue. Then do the download/reload of software for the accessory function.


Note!
When doing an aftermarket installation of DAB or DAB+, it is necessary to carry out a DAB application download.


Note!
When upgrading from DAB to DAB+, a DAB re-load is necessary.

Carry out a download, or a re-load, of accessory function software by following VIDA service information.