2020 R.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC40 2020
R.H.D

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
322881211.032288120
Steering wheel leather heated




Equipment
IMG-345497
IMG-239664

IMG-450006

IMG-462578


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-400010
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

3
IMG-462098
 

Remove the marked part.

4
IMG-462002
 

Caution!
Left side! This step applies also to right-hand drive vehicles!

Remove the screw.

Remove the marked part.

5
IMG-462099
 

Remove the marked part.

6
IMG-462100
 

Remove the marked part.

7
IMG-462101
 
8
IMG-443405
 


Tightening torque: Front seat to body , 40 Nm

9
IMG-462102
 
10
IMG-443407
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

11
IMG-400000
 

Repeat the steps when removing on opposite side.

 

Disconnecting the battery

12
IMG-462297
 

Note!
Make sure that the steering column lock is not engaged.

Turn on the ignition.

13
IMG-400002
 

Remove the battery's negative cable.

 

Removal

14
IMG-462103
 
15
IMG-462105
 
16
IMG-449570
 
17
IMG-462295
 

Caution!
Make sure to protect adjacent surfaces or components.

18
IMG-462110
 
19
IMG-449577
 
20
IMG-462104
 
  1. Release the catch.

  2. Loosen the marked detail.

21
IMG-462115
 
22
IMG-462112
 
23
IMG-449573
 
24
IMG-462114
 
  1. Release the catch.

  2. Loosen the marked detail.

25
IMG-462130
 

Turn the steering wheel into neutral position.

26
IMG-462148
 

Warning!
When temporarily storing a pyrotechnical component, it must always be positioned with its active part (e.g. air bag front or equivalent) facing up.

Release the connector's catch.

Use: Electrician's screwdriver

Disconnect the connector.

Remove the marked part.

27
IMG-449866
 

Disconnect the connector.

28
IMG-462168
 

Remove the screw.

Remove the marked part.

29
IMG-449970
 

Note!
The graphic shows the back of the component before removal.

30
IMG-449977
 

Release the catches.

Use: Electrician's screwdriver

Loosen the marked detail.

31
IMG-449978
 

Remove the marked detail/details.

Use: Electrician's screwdriver

32
IMG-449990
 

Remove the screws.

33
IMG-462169
 

Repeat on the other side.

34
IMG-445881
 

Remove the nut.

Fold marked part aside.

35
IMG-462172
 

Repeat on the other side.

36
IMG-462298
 

Remove the screw.

Remove the marked part.

37
IMG-462299
 

Disconnect the connectors.

Remove the cable harness clips.

38
IMG-462300
 

Loosen the screws.

39
IMG-462301
 

Release the catch.

Remove the marked part.

 

Accessory installation

40
IMG-462302
 

Caution!
Take extra care when handling the component.

Install component that comes with the accessory kit.

Tighten the screw.


Tightening torque: Steering wheel module, to Steering column , 6 Nm

41
IMG-462296
 

Caution!
Observe caution when carrying out this step.

42
IMG-462303
 

Note!
Orientation view

43
IMG-462356
 

Release the connector's secondary lock.

Lift approximately 2 mm.

44
IMG-461913
 

Install component that comes with the accessory kit.

45
IMG-462362
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

46
IMG-462299
 

Reinstall the removed parts in reverse order.

47
IMG-462368
 

Position/route the cable harness as illustrated.

Install the wiring harness.

Use a cable tie

48
IMG-462390
 

Position/route the cable harness as illustrated.

49
IMG-462479
 

Caution!
Make sure to locate the wiring in such a way that contact with any moving components is avoided.

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

50
IMG-462481
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

51
IMG-462507
 

Pull the wiring harness through.

Install the wiring harness.

Use a cable tie

52
IMG-462559
 
53
IMG-462560
 

Position/route the cable harness as illustrated.

Install the wiring harness.

Use tape

54
IMG-462568
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

55
IMG-462569
 

Remove the nut.

Connect the ground cable.

Install the nut.


Tightening torque: M6 , 10 Nm

56
IMG-462044
 

Release the catch.

Remove the marked part.

57
IMG-462045
 

Remove the marked detail/details.

58
IMG-462046
 

Remove the nuts.

59
IMG-462268
 

Remove the cable tie(s).

60
IMG-462061
 
61
IMG-462064
 

Release the catches.

Remove the marked part.

62
IMG-462073
 

Connect the prerouted cable.

63
IMG-462271
 

Install component that comes with the accessory kit.

64
IMG-462283
 

Reinstall the removed parts in reverse order.

Place the cable tie as illustrated.

65
IMG-462284
 

Reinstall the removed parts in reverse order.

66
IMG-462290
 

Route the cable harness to the existing cable harness.

Position the cable harness excess as illustrated.

Install the wiring harness.

Use a cable tie

 

Installation

67
IMG-462609
 
68
IMG-462570
 

Install the marked component.

Reinstall the screw.

69
IMG-462573
 

Reinstall the removed part.

70
IMG-462571
 

Reinstall the removed parts in reverse order.

 

Removal

71
IMG-436995
 

Note!
The graphic shows the back of the component before removal.

The part is to be reused.

72
IMG-437033
 

Repeat on the other side.

73
IMG-437034
 

Repeat on the other side.

74
IMG-437176
 

Remove the marked part.

75
IMG-461777
 

Disconnect the connectors.

Repeat on the other side.

76
IMG-449800
 

Remove the screw.

The item is to be reused.

 

Accessory installation

77
IMG-449870
 

Note!
Press the wire into the grove to secure it.

Assemble components that come with the accessory kit.

78
IMG-449925
 

Ground connection

Position/route the cable as illustrated.

Install the screw.

79
IMG-461778
 

Connect the connectors.

Repeat on the other side.

80
IMG-449875
 
81
IMG-462165
 

Note!
The markings must be opposite each other.

Install the marked component.

82
IMG-462166
 

Install component that comes with the accessory kit.


Tightening torque: Steering wheel to steering column (center screw) , 60 Nm

83
IMG-449867
 

Connect the connectors.

84
IMG-462293
 

Caution!
Ensure that the wiring harness is correctly positioned and pressed into the grooves.

85
IMG-462575
 

Warning!
Make sure that the component has locked properly in position by pulling it towards you.

Connect the connector.

Install the marked component.

 

Installation

86
IMG-400000
 

Reinstall the removed parts in reverse order.

87
IMG-400003
 

Reinstall the battery's negative cable.


Tightening torque: Battery cable for battery , 6 Nm

88
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 32204568