Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC60 2016
XC60 (-17) 2016 R.H.D

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313991001.19487189
Parking assistance camera wide angle front




IMG-374543




 

Special tools

 

999 7482 Cutting tool

Tool number:999 7482

Tool description:Cutting tool

Tool boards:30


Materials

Designation

Part number

Low temperature grease

1161427


Equipment
IMG-242205
A0000162
IMG-239664
IMG-300203
IMG-327738
IMG-239667

IMG-380917


 
  
36686-2

Parking assistance, camera, wide angle front

Equipment

Designation

Expander pliers

Angle drill machine


 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
IMG-332179
 

Set the ignition key to position 0.

Remove the battery's negative cable.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-345728
 

Remove the panel.

5
IMG-345734
 

Disconnect the connector.

6
IMG-345736
 

Release the catches.

7
IMG-345737
 

Remove the panel.

8
IMG-375948
 

Remove the screws.

9
IMG-345745
 

Remove the screws.

10
IMG-340598
 

Remove the panel.

11
IMG-345746
 

Remove the panel.

12
IMG-340599
 
  1. Fold the carpet to the side.

  2. Remove the cable harness clips.

  3. Disconnect the connector.

13
IMG-340600
 

Remove the panel.

 

Vehicles with the 4C system.

14
IMG-340601
 

Disconnect the connector.

 

All vehicles

15
IMG-340602
 

Use tape

16
IMG-375952
 
17
IMG-293010
 
18
IMG-375953
 
19
IMG-340604
 

Disconnect the connector.

20
IMG-340605
 

Remove the screws.

21
IMG-340607
 
22
IMG-380815
 
 

Accessory installation

23
IMG-380819
 
24
IMG-380816
 
 

Removal

25
IMG-345767
 

Remove the screws.

26
IMG-345766
 
27
IMG-380933
 

Disconnect the connectors.

28
IMG-341780
 
29
IMG-341781
 
30
IMG-341773
 
31
IMG-374438
 

Remove the screws.

32
IMG-374497
 

Detach the panel.

33
IMG-374495
 

Disconnect the connector.

 

Accessory installation

34
IMG-374547
 

Install component that comes with the accessory kit.

35
IMG-362040
 

Locate the existing connector in the vehicle's cable harness.

Connect the connector.

36
IMG-374510
 

Tear off the excess foam tape.

Clamp the cables and connectors to the existing cables to prevent noise.

37
IMG-345849
 
38
IMG-345850
 
39
IMG-345851
 
40
IMG-380974
 
41
IMG-380976
 
42
IMG-345906
 
43
IMG-345911
 
44
IMG-345916
 

Locate the rubber grommet under the insulation and press it out.

45
IMG-345917
 

Pull the wiring through.

46
IMG-380941
 

Connect the prerouted cable.

47
IMG-380943
 

Connect the connectors.

48
IMG-345862
 
49
IMG-345767
 

Reinstall the screws.

50
 

Reinstall the removed parts in reverse order.

 

Removal

51
IMG-345865
 
52
IMG-345866
 

Use tape

53
IMG-345867
 
54
IMG-345871
 
55
IMG-345872
 
56
IMG-345873
 

Remove the part carefully

57
IMG-345874
 
58
IMG-345875
 
59
IMG-345876
 
60
IMG-307687
 
61
IMG-307688
 
62
IMG-345877
 
  1. Remove the clips.

  2. Remove the screws.

63
IMG-345878
 
64
IMG-345920
 

Locate the rubber grommet under the insulating mat.

65
IMG-345921
 

Pull the wiring through.

66
IMG-345881
 
67
IMG-345922
 

Use: Expander pliers

Use: 1161427, Low temperature grease

68
IMG-345923
 
69
IMG-273585
 
70
IMG-340532
 

Remove the nuts.

71
IMG-340579
 
72
IMG-345924
 
73
IMG-345926
 

Caution!
Make sure to locate the wiring in such a way that any damage caused by heat or excessive wear is avoided.


Note!
Do not yet tighten the clamps.

Route the cable harness to the existing cable harness.

74
IMG-345927
 
75
IMG-307911
 

Route the cable harness to the existing cable harness.

76
IMG-345928
 

Route the cable harness to the existing cable harness.

77
IMG-345929
 
78
IMG-340782
 
79
IMG-345930
 

Caution!
Tighten clamps properly.

80
IMG-347781
 
81
IMG-347786
 
82
IMG-375872
 

Note!
Orientation view


Note!
This step is easier with two people.

83
IMG-375871
 

Use: Angle drill machine


Use special tool: T9997482, Cutting tool

84
IMG-375843
 

Use: Angle drill machine


Use special tool: T9997482, Cutting tool

85
IMG-375883
 
86
IMG-347781
 
87
IMG-347786
 
88
IMG-374396
 
89
IMG-374391
 
90
IMG-375891
 

Connect the connector.

91
IMG-375895
 
92
IMG-345932
 

Caution!
Tighten clamps properly.

Insert the cable in to the passenger compartment, adjust the cable length out into the engine compartment and secure the rubber grommet.

Reinstall the removed parts in reverse order.

93
IMG-242268
 

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31285245