Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V40 2014
V40 (13-) 2014 B4164T3, V40 (13-) 2014 B4164T, V40 (13-) 2014 B4164T4

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
313391111.631373326, 31339099
Electric engine heater, 230 V




 

Materials

Designation

Part number

Low temperature grease

1161427


Equipment
IMG-345497
IMG-239664
IMG-239660

IMG-362781

IMG-362782


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Conditions

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

4
IMG-332193
 

Set the ignition key to position 0.

5
IMG-362805
 

Open the hood.

6
IMG-362807
 
7
IMG-368369
 
8
IMG-368376
 

Remove the screws.

9
IMG-362811
 

Remove the nut.

10
IMG-371233
 

Fold the wing liner to one side.

 

Vehicles with headlamp washers

11
IMG-367834
 

Raise the car.

12
IMG-371250
 

Note!
Orientation view

13
IMG-371252
 

Release the lock.

Remove the hose.

 

All vehicles

14
IMG-371253
 
15
IMG-371254
 

Remove the screws.

16
IMG-371255
 

Remove the nut.

17
IMG-371258
 

Fold the wing liner to one side.

 

Vehicles with headlamp washers

18
IMG-371264
 

Note!
Orientation view

19
IMG-371260
 

Remove the hose.

Take a piece of washer hose. Tie a knot in it and place it on the washer pump to prevent the washer fluid reservoir from emptying.

 

All vehicles

20
IMG-358506
 

Raise the car.

  1. Remove the clips.

  2. Remove the screws.

21
IMG-358531
 
22
IMG-358536
 

Remove the clips.

23
IMG-371193
 

Remove the screws.

24
IMG-371266
 
25
IMG-371659
 

Note!
Orientation view

26
IMG-371658
 

Note!
Close the drain cock after the coolant has drained.

Place a container under the car.

Drain the coolant.

 

Accessory installation

27
IMG-362821
 

Clean the Bumper Cover surface.

28
IMG-367812
 

Take the template from the kit and cut it out following the dotted line.

29
IMG-367857
 
30
IMG-362828
 
31
IMG-362839
 

Use tape

32
IMG-362840
 

Caution!
Cut carefully to avoid unintentional damage or personal injury.

33
IMG-367881
 
34
IMG-362843
 

Pull the wiring through.

35
IMG-367882
 
36
IMG-363401
 
37
IMG-371233
 

Fold the wing liner to one side.

38
IMG-367799
 

Note!
Orientation view

39
IMG-367798
 
40
IMG-362901
 
41
IMG-362914
 

Caution!
No grease on contact surfaces.

Lubricate the O-ring.

Use: 1161427, Low temperature grease

42
IMG-367847
 
43
IMG-367848
 

Install the catch.

44
IMG-367849
 

Install the cable.

 

Removal

45
IMG-362936
 

Note!
Orientation view

46
IMG-407205
 

Caution!
Cut carefully to avoid unintentional damage or personal injury.

Cut the component following the instructions in the graphic.

47
IMG-362963
 

Note!
Do not loosen the bolt more than 4 turns.

 

Accessory installation

48
IMG-362964
 
49
IMG-362965
 

Tighten the screw.


Tightening torque: M8 , 24 Nm

50
IMG-362971
 

Note!
Maximum 2 turns.

Install the screw.

 

Cars with manual transmissions

51
IMG-362972
 
 

All vehicles

52
IMG-362973
 
53
IMG-362974
 

Tighten the screw.

54
IMG-363171
 
55
IMG-363173
 

Tighten the hose clamps.

56
IMG-363177
 

Note!
Orientation view

57
IMG-363436
 

Install the clips as illustrated.

58
IMG-363446
 
59
IMG-363192
 

Caution!
Tighten clamps properly.

60
IMG-362914
 

Caution!
No grease on contact surfaces.

Lubricate the O-ring.

Use: 1161427, Low temperature grease

61
IMG-363203
 
62
IMG-363205
 

Install the catch.

63
IMG-363206
 

Fill with coolant and run the engine to operating temperature.

Vent the cooling system and check for leakage.

Post-fill the cooling system if necessary.

64
 

Reinstall the removed parts in reverse order.

65
IMG-370207
 

On both sides.

66
IMG-370203