Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
S80 2016
S80 (07-) 2016

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
322709101.032270869
Digital radio, DAB




 

Special tools

 

951 2620 Stripping tool (for wiring)

Tool number:951 2620

Tool description:Stripping tool (for wiring)

Tool boards:39

 

951 2785 Crimping tool (included in 9512669)

Tool number:951 2785

Tool description:Crimping tool (included in 9512669)

Tool boards:39

 

951 2777 Hot-air gun

Tool number:951 2777

Tool description:Hot-air gun

Tool boards:08



IMG-460759

IMG-462354


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
IMG-400004
 

Caution!
Attach the antenna wires using tape. Cable ties or similar must not be used.


Caution!
Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

 

Color symbols

3
IMG-400010
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

4
IMG-462330
 
5
IMG-462331
 

Remove the marked part.

6
IMG-461362
 

Remove the marked part.

Disconnect any connector(s).

7
IMG-462363
 


Tightening torque: Safety belt lower anchor to body (rear) , 40 Nm

8
IMG-462304
 
9
IMG-462320
 

Loosen the marked detail.

Repeat on the other side.

10
IMG-462321
 

Remove the marked part.

Repeat on the other side.

11
IMG-462337
 

Remove the panel.

Repeat on the other side.

12
IMG-462364
 

Remove the marked detail/details.

13
IMG-462365
 

Remove the marked part.

14
IMG-354313
 

Remove the panel.

Disconnect the connector, if applicable.

15
IMG-354315
 

Remove the weatherstrip.

16
IMG-354318
 

Caution!
The front and upper sill panel must be removed and installed as one unit.

17
IMG-354319
 
18
IMG-344930
 
19
IMG-462076
 

Remove the marked part.

Repeat on the other side.

20
IMG-340979
 
21
IMG-340980
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

22
IMG-303005
 
23
IMG-303006
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

24
IMG-400002
 

Remove the battery's negative cable.

 

Alternative 1

25
IMG-380657
 
 

Alternative 2

26
IMG-380655
 
27
IMG-380656
 
 

All vehicles

28
IMG-329151
 
29
IMG-373198
 

Note!
Orientation view

30
IMG-329209
 

Loosen the screws.

Disconnect the connector.

31
IMG-382639
 

Disconnect the connector, if applicable.

32
IMG-329153
 

Caution!
Be extra careful when removing or installing this component.

33
IMG-460418
 

Remove the screws.

Loosen the marked detail.

 

Vehicles with High Performance Sound

34
IMG-460425
 

Disconnect the connector.

 

Vehicles with Premium Sound

35
IMG-460422
 

Disconnect the connector.

 

All vehicles

36
IMG-460609
 

Note!
Orientation view

 

Accessory installation

37
IMG-460610
 

Loosen the tape temporarily.

The item is to be reused.

38
IMG-460611
 
39
IMG-460426
 


Use special tool: T9512620, Stripping tool (for wiring)

40
IMG-460764
 

Use detail according to image.

41
IMG-460428
 


Use special tool: T9512620, Stripping tool (for wiring)

42
IMG-460373
 
43
IMG-460547
 


Use special tool: T9512785, Crimping tool (included in 9512669)

44
IMG-460375
 

Caution!
Make sure that the surrounding components are protected from heat.


Use special tool: T9512777, Hot-air gun

45
IMG-460376
 
46
IMG-460660
 
47
IMG-460520
 

Connect the connectors.

48
IMG-461499
 

Fold the carpet aside.

49
IMG-461501
 

Remove the screw.

50
IMG-461502
 

Connect the ground cable.

Reinstall the screw.

51
IMG-461506
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

52
IMG-462361
 

Route the cable harness to the existing cable harness.

Install the wiring harness.

Use a cable tie

53
IMG-461500
 

Fold the floor carpet back.

54
IMG-460843
 

Caution!
Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

Place the overlap of the cable mat under the amplifier.

Reinstall the removed part.

Reinstall the screws.


Tightening torque: M6 , 10 Nm

55
IMG-462369
 

Note!
Orientation view

56
IMG-460480
 

Assemble components that come with the accessory kit.

57
IMG-460484
 

Install component that comes with the accessory kit.

58
IMG-462341
 
59
IMG-462346
 
60
IMG-462576
 

Install component that comes with the accessory kit.

61
IMG-463100
 

Connect the connectors.

62
IMG-462417
 

Note!
Orientation view

63
IMG-462413
 

Disconnect the connectors.

Remove the screw.

Remove the marked part.

64
IMG-460766
 

Use details according to image.

65
IMG-460546
 

Assemble components that come with the accessory kit.

Depress the secondary lock.

66
IMG-463102
 

Install component that comes with the accessory kit.

Install the screw.


Tightening torque: M6 , 10 Nm

67
IMG-463129
 

Connect the connectors.

68
IMG-463134
 

Caution!
Attach the antenna wires using tape. Cable ties or similar must not be used.

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

69
IMG-463191
 

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

70
IMG-463286
 

Fold the insulation aside.

71
IMG-463287
 

Route the wire adjacent to existing wirings.

Install the cable.

Use tape

72
IMG-463288
 
73
IMG-463291
 
74
IMG-461534
 

Caution!
Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

Position the cable harness excess as illustrated.

Install the wiring harness.

Use tape

75
 

Reinstall the removed parts in reverse order.

76
IMG-400003
 

Reinstall the battery's negative cable.

77
IMG-400006
 

Order and download software according to VIDA/SOFTWARE.

Order and download software according to: 30786292

Download software (application) for the accessory's function according to the service information in VIDA.

Order and download software according to: 31266811