| | |
| | Read through all of the instructions before starting installation. Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation. Ensure that all tools stated in the instructions are available before starting installation. Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps. In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.
|
| | |
| | There may be parts in the accessories kit that are not needed for this installation. |
| | |
|  | | IMG-440436 |
|
| | Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps. |
Used for focused component, the component with which you will do something. Used as extra colors when you need to show or differentiate additional parts. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc. Used when the component is not fully removed from the vehicle but only hung to the side. Used for standard tools and special tools. Used as background color for vehicle components. Used for accessory components.
|
| | |
| | Note!
The removal steps may contain installation details. |
|
|  | | IMG-394535 |
|
| | |
|  | | IMG-394500 |
|
| | Move marked component forward. |
|  | | IMG-394038 |
|
| | |
|  | | IMG-394018 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-394039 |
|
| | Note!
Perform the procedure one side at a time. |
|
|  | | IMG-462177 |
|
| | |
|  | | IMG-399420 |
|
| | |
|  | | IMG-462059 |
|
| | The image shows seat without upholstery. Release the locks. Remove the marked part. |
| | |
|  | | IMG-464160 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-464187 |
|
| | |
|  | | IMG-464163 |
|
| | Assemble components that come with the accessory kit. |
|  | | IMG-464165 |
|
| | Assemble components that come with the accessory kit. |
|  | | IMG-464166 |
|
| | Note!
Make sure that the component reaches its end position. |
Assemble components that come with the accessory kit. |
|  | | IMG-464185 |
|
| | Assemble components that come with the accessory kit. Ensure that all clips engage. |
|  | | IMG-464429 |
|
| | Pull the wiring harness through. |
|  | | IMG-464430 |
|
| | |
|  | | IMG-464431 |
|
| | Make sure that the gasket is correctly located. |
|  | | IMG-452529 |
|
| | Assemble components that come with the accessory kit. |
|  | | IMG-454578 |
|
| | |
|  | | IMG-464432 |
|
| | Install the marked component. |
|  | | IMG-452547 |
|
| | Note!
This step is easier with two people. |
Adjust to the specified value. |
|  | | IMG-464433 |
|
| | Note!
This step is easier with two people. |
Tighten the bolts. |
|  | | IMG-464434 |
|
| | Try to insert any cable excess. |
|  | | IMG-406221 |
|
| | |
|  | | IMG-407340 |
|
| | Caution!
Pull up the upholstery to cover lower part of bracket. |
|
|  | | IMG-407341 |
|
| | Caution!
Press the foam padding upward against the upholstery. |
|
|  | | IMG-464198 |
|
| | Caution!
Check that the component has locked in its bottom position. |
|
|  | | IMG-414067 |
|
| | Note!
Make sure that the backrest upholstery touches the head restraint, showing no space in between. |
Compare with upholstery and head restraint on the other front seat. |
|  | | IMG-413617 |
|
| | Note!
Make sure that the backrest upholstery touches the head restraint, showing no space in between. |
Compare with upholstery and head restraint on the other front seat. If adjustment is necessary, follow the procedure described in the method step below. |
| | | IMG-407341 |
|
| | Caution!
Press the foam padding upward against the upholstery. |
|
|  | | IMG-452549 |
|
| | Place the component where indicated in the graphic. Adjust the position of the wiring harness. |
|  | | IMG-454825 |
|
| | Install the screws. Make sure that the gasket is correctly located. Tighten the bolts. |
|  | | IMG-452560 |
|
| | |
|  | | IMG-464206 |
|
| | |
| | Applies when installing on right-hand seat. |
|  | | IMG-462904 |
|
| | Install component that comes with the accessory kit. |
|  | | IMG-462898 |
|
| | Note!
The component is installed angled inwards. |
Install component that comes with the accessory kit. |
|  | | IMG-464442 |
|
| | Position/route the cable as illustrated. Connect the connectors. |
|  | | IMG-464444 |
|
| | Install component that comes with the accessory kit. Connect the connectors. Position/route the cable as illustrated. |
|  | | IMG-463537 |
|
| | Note!
Place the cable tie as illustrated. |
Position/route the cable as illustrated. Tighten the cable tie. |
| | Applies when installing on left-hand seat. |
|  | | IMG-465042 |
|
| | Install component that comes with the accessory kit. |
|  | | IMG-465044 |
|
| | Note!
The component is installed angled inwards. |
Install component that comes with the accessory kit. |
|  | | IMG-465220 |
|
| | |
|  | | IMG-465221 |
|
| | Install component that comes with the accessory kit. Connect the connectors. |
|  | | IMG-465049 |
|
| | Note!
Place the cable tie as illustrated. |
Position/route the cable as illustrated. Tighten the cable tie. |
| | |
|  | | IMG-383130 |
|
| | Remove the screws.
Tightening torque: Front seat to body
, 40 Nm
|
|  | | IMG-397249 |
|
| | Move marked component backwards. |
|  | | IMG-383129 |
|
| | Remove the screws.
Tightening torque: Front seat to body
, 40 Nm
|
|  | | IMG-383134 |
|
| | |
|  | | IMG-396605 |
|
| | Release the connector's catch. Release the lock. Disconnect the connector.
|
|  | | IMG-396606 |
|
| | Unhook the cable harness clips. |
|  | | IMG-403720 |
|
| | Remove the marked part. Remove the screw. |
|  | | IMG-465119 |
|
| | Lift marked component out. Hint
This step may require the aid of another technician. |
|
|  | | IMG-418918 |
|
| | |
|  | | IMG-454620 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-454614 |
|
| | Reinstall the removed part. |
|  | | IMG-459039 |
|
| | Route the wire adjacent to existing wirings. Install the cable. Use a cable tie |
| | Repeat the steps when removing on opposite side. Repeat the steps when installing accessories on opposite side. |
| | |
|  | | IMG-460034 |
|
| | Remove the screws. Fold marked part aside.
Tightening torque: M6
, 10 Nm
|
|  | | IMG-460065 |
|
| | Release the lock. Remove the marked part. |
|  | | IMG-422120 |
|
| | Caution!
Make sure that the seat backrest upholstery (fold down position) is not damaged by contact with the floor! |
|
|  | | IMG-460243 |
|
| | |
|  | | IMG-451542 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-451557 |
|
| | |
|  | | IMG-451563 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-414995 |
|
| | Fold marked part aside. Remove the screw. |
|  | | IMG-451565 |
|
| | Remove the part carefully Fold marked part aside. |
|  | | IMG-460470 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-456227 |
|
| | Release the catch. Remove the marked part. |
|  | | IMG-456229 |
|
| | Remove the panel. Use hands only. |
|  | | IMG-456235 |
|
| | Remove the panel. Use hands only. Disconnect the connector, if applicable. |
|  | | IMG-453506 |
|
| | |
|  | | IMG-453516 |
|
| | |
|  | | IMG-401580 |
|
| | |
|  | | IMG-412242 |
|
| | Remove the panel. Disconnect the connector, if applicable. |
|  | | IMG-414575 |
|
| | |
|  | | IMG-390091 |
|
| | Disconnect the connector, if applicable. |
|  | | IMG-414580 |
|
| | |
|  | | IMG-397280 |
|
| | |
|  | | IMG-397244 |
|
| | |
|  | | IMG-397247 |
|
| | |
| | Repeat the steps when installing accessories on opposite side. |
|  | | IMG-460188 |
|
| | |
|  | | IMG-460260 |
|
| | |
| | Vehicles with spare wheel |
|  | | IMG-411295 |
|
| | Release the lock. Loosen the marked detail. |
|  | | IMG-411296 |
|
| | |
| | |
|  | | IMG-460262 |
|
| | |
|  | | IMG-460263 |
|
| | |
| | Vehicles with keyless entry |
|  | | IMG-460273 |
|
| | Release the catch. Fold marked part aside. |
| | |
|  | | IMG-460279 |
|
| | |
|  | | IMG-460283 |
|
| | |
| | | IMG-460283 |
|
| | Remove the marked part.
Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304
|
|  | | IMG-460284 |
|
| | Remove the screw.
Tightening torque: Cargo anchor, to body
, 24 Nm
Remove the marked part. |
| | Repeated on the left-hand side. |
|  | | IMG-460293 |
|
| | Remove the screw. Repeat on the other side. |
|  | | IMG-460304 |
|
| | |
|  | | IMG-460930 |
|
| | |
|  | | IMG-460931 |
|
| | Remove the marked part.
Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304
|
|  | | IMG-460932 |
|
| | Remove the nut.
Tightening torque: Cargo anchor, to body
, 24 Nm
|
|  | | IMG-460933 |
|
| | |
|  | | IMG-460940 |
|
| | Remove the marked part. Disconnect any connector(s). |
|  | | IMG-460995 |
|
| | Note!
The number of connectors may vary depending on the vehicle's equipment level. |
The graphic shows the back of the component. Disconnect the connectors. |
|  | | IMG-460941 |
|
| | |
|  | | IMG-460314 |
|
| | Remove the marked part. Fold marked part aside.
Use special tool: T9995919, PULLER (SEAL-PINION,CAM-CRANKSHAFT)B200-6304
Remove the screw.
|
|  | | IMG-460901 |
|
| | |
|  | | IMG-446380 |
|
| | Note!
The number of connectors may vary depending on the vehicle's equipment level. |
The graphic shows the back of the component. Disconnect the connectors. |
|  | | IMG-460312 |
|
| | Note!
The graphic shows the back of the component before removal. |
|
|  | | IMG-460906 |
|
| | Remove the marked part. Repeat on the other side. |
|  | | IMG-460331 |
|
| | Remove the screws. Remove the marked part. Repeat on the other side. |
| | |
|  | | IMG-460361 |
|
| | |
|  | | IMG-459127 |
|
| | Install component that comes with the accessory kit. |
|  | | IMG-461009 |
|
| | Clean the surface. Use: 1161721, Isopropanol
|
|  | | IMG-461010 |
|
| | Note!
Press and apply pressure to the part over the tape for at least 20 seconds. |
Install component that comes with the accessory kit. |
|  | | IMG-446461 |
|
| | Clean the surface. Use: 1161721, Isopropanol
|
|  | | IMG-446462 |
|
| | Note!
Press and apply pressure to the part over the tape for at least 20 seconds. |
Install component that comes with the accessory kit. |
|  | | IMG-461011 |
|
| | Install the marked component. |
|  | | IMG-460345 |
|
| | Position/route the cable as illustrated. Install the cables. Use a cable tie |
|  | | IMG-451678 |
|
| | Disconnect the connector. |
|  | | IMG-451683 |
|
| | |
|  | | IMG-451908 |
|
| | Connect the connector. Place the cable tie as illustrated. |
|  | | IMG-451695 |
|
| | Connect the connector. Secure the connectors. |
|  | | IMG-460381 |
|
| | |
|  | | IMG-416273 |
|
| | Remove the nuts. Fold marked part aside. |
|  | | IMG-416275 |
|
| | Release the catches. Fold marked part aside. |
|  | | IMG-388467 |
|
| | |
|  | | IMG-389347 |
|
| | |
|  | | IMG-446581 |
|
| | |
|  | | IMG-446585 |
|
| | Position/route the cable as illustrated. Install the cable. Use a cable tie |
|  | | IMG-389348 |
|
| | Reinstall the removed part. |
|  | | IMG-416277 |
|
| | Reinstall the removed part. |
|  | | IMG-493611 |
|
| | Install component that comes with the accessory kit. |
|  | | IMG-493612 |
|
| | Note!
If position DF18 is occupied, replace the existing fuse with a 40A fuse. |
Install component that comes with the accessory kit. |
|  | | IMG-388631 |
|
| | |
|  | | IMG-388638 |
|
| | |
|  | | IMG-446557 |
|
| | Connect the ground cable. Install the nut.
Tightening torque: M6
, 10 Nm
|
|  | | IMG-388633 |
|
| | |
|  | | IMG-455025 |
|
| | |
|  | | IMG-454710 |
|
| | Release the lock. Remove the marked part. |
|  | | IMG-453168 |
|
| | |
|  | | IMG-454916 |
|
| | |
|  | | IMG-454152 |
|
| | Reinstall the removed part. |
|  | | IMG-459314 |
|
| | Reinstall the removed part. Reinstall the clips. |
|  | | IMG-460193 |
|
| | Reinstall the removed part. |
|  | | IMG-460195 |
|
| | Position/route the cable as illustrated. |
| | | IMG-388631 |
|
| | |
| | | IMG-388638 |
|
| | |
| | | IMG-446557 |
|
| | Connect the ground cable. Install the nut.
Tightening torque: M6
, 10 Nm
|
| | | IMG-388633 |
|
| | |
|  | | IMG-460456 |
|
| | Position/route the cable as illustrated. Use a cable tie |
|  | | IMG-460182 |
|
| | Position/route the cable as illustrated. Use a cable tie |
|  | | IMG-460184 |
|
| | Position/route the cable as illustrated. Place any excess inside the floor carpet. Use a cable tie |
|  | | IMG-465123 |
|
| | Install the marked component. Hint
This step may require the aid of another technician. |
|
|  | | IMG-454910 |
|
| | |
|  | | IMG-460460 |
|
| | Position/route the cable as illustrated. Use a cable tie |
|  | | IMG-460468 |
|
| | Position/route the cable as illustrated. Use a cable tie |
|  | | IMG-460180 |
|
| | Position/route the cable as illustrated. Use a cable tie |
|  | | IMG-460181 |
|
| | Position/route the cable as illustrated. Place any excess inside the floor carpet. Use a cable tie |
| | | IMG-465123 |
|
| | Install the marked component. Hint
This step may require the aid of another technician. |
|
|  | | IMG-454773 |
|
| | |
| | |
| | Reinstall the removed parts in reverse order. |
|  | | IMG-424469 |
|
| | |
|  | | IMG-424470 |
|
| | Check for correct operation. |
