Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V90 2018
V90 (17-) 2018

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
307957131.132207882, 32207883
Fuse box, accessory




 

Materials

Designation

Part number

Isopropanol

1161721


Equipment
IMG-345497
IMG-239664
IMG-239667

IMG-451967


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-440436
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

3
IMG-394535
 
 

Removal

4
IMG-411070
 
5
IMG-414613
 

Remove the marked part.

6
IMG-414614
 
7
IMG-414995
 

Remove the screw.


Tightening torque: Seat belt guide, to Bracket , 4.4 Nm

8
IMG-415047
 
9
IMG-415049
 

Release the catch.

Remove the marked part.

10
IMG-418525
 

Remove the screw.


Tightening torque: Cargo anchor, to body , 13 Nm

11
IMG-414611
 

Remove the marked part.

12
IMG-415830
 

Repeat on the other side.

13
IMG-415831
 

Remove the screw.


Tightening torque: Cargo anchor, to body , 13 Nm

Repeat on the other side.

14
IMG-416086
 
15
IMG-416087
 

Remove the marked part.

 

Vehicles with keyless entry

16
IMG-413321
 
 

All vehicles

17
IMG-415835
 

Remove the screws.

18
IMG-416089
 

Remove the marked part.

19
IMG-418545
 

Disconnect the connectors.

Remove the panel.

 

Accessory installation

20
IMG-448667
 

Clean the surface.

Use: 1161721, Isopropanol

21
IMG-448668
 

Note!
Press and apply pressure to the part over the tape for at least 20 seconds.

Install component that comes with the accessory kit.

When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

22
IMG-446461
 

Clean the surface.

Use: 1161721, Isopropanol

23
IMG-446462
 

Note!
Press and apply pressure to the part over the tape for at least 20 seconds.

Install component that comes with the accessory kit.

24
IMG-448676
 

Install the marked component.

25
IMG-448679
 

Position/route the cables as illustrated.

Install the cables.

Use a cable tie

 

Vehicles with towbar

26
IMG-451678
 

Disconnect the connector.

27
IMG-451683
 

Connect the connector.

28
IMG-451908
 

Connect the connector.

 

Vehicles without tow hitch.

29
 

Locate the pre-routed connectors.

30
IMG-451695
 

Connect the connector.

Secure the connectors.

Use a cable tie

 

All vehicles

31
IMG-423576
 

Remove the marked part.

32
IMG-416273
 

Remove the nut.

Fold marked part aside.

33
IMG-416275
 

Release the catches.

Fold marked part aside.

34
IMG-388467
 

Fold marked part aside.

35
IMG-389347
 

Remove the marked part.

36
IMG-446581
 

Connect the cable.

37
IMG-446585
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

38
IMG-389348
 

Reinstall the removed part.

39
IMG-416277
 

Reinstall the removed part.

40
IMG-451906
 

Install components that come with the accessory kit.

41
IMG-388631
 
42
IMG-388638
 

Remove the nut.

43
IMG-446557
 

Connect the prerouted cable.

Install the nut.


Tightening torque: M6 , 10 Nm

44
IMG-388633
 
 

Installation

45
 

Reinstall the removed parts in reverse order.