Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Preparation

Clean the surface.

Allow to dry.

Use: 1161721, Isopropanol

Masking

Use: , Masking tape

Apply a thin and even layer.

Use: 1161727, Paint primer

Allow to dry for at least 5 minutes but not more than 30 minutes.

Remove the tape.

Repeat all method steps for the other side.

Accessory installation

Fold the protective film forward

To be repeated in the other end of the component.

Place the component where indicated in the graphic.

Remove the protective film.

Press the marked component.

Use a drill with the stated size

Install component that comes with the accessory kit.

Repeat the steps when installing accessories on opposite side.