Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
V60 Cross Country 2020
V60 Cross Country (19-) 2020

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
322072631.032207261, 32207262
Alarm, siren




 

Special tools

 

999 7515 Puller

Tool number:999 7515

Tool description:Puller

Tool boards:30


Equipment
IMG-345497
IMG-239664

IMG-451395


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-440436
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

3
 

Note!
The removal steps may contain installation details.

4
IMG-426135
 

Turn off the ignition.

5
IMG-451411
 

Open the hood.

6
IMG-451562
 

Loosen the marked details.

7
IMG-451567
 

Remove the nuts.

8
IMG-451575
 

Remove the marked part.

9
IMG-453708
 

Release the lock.

Loosen the marked details.

10
IMG-451206
 

Remove the marked part.


Use special tool: T9997515, Puller

Repeat on the other side.

11
IMG-451581
 

Release the catches.

Loosen the marked detail/details.

12
IMG-451640
 

Remove the marked part.

13
IMG-451620
 

Remove the clips.

Remove the screws.


Tightening torque: M6 , 10 Nm

14
IMG-451625
 

Lift the marked component up

15
IMG-451285
 

Loosen the marked detail.

16
IMG-451735
 

Remove the marked part.

17
IMG-451323
 

Remove the screw.


Tightening torque: M5 , 5 Nm

18
IMG-451330
 

Loosen the clips.

19
IMG-453705
 

Loosen the clips.

Loosen the marked detail.

Seal the hole.

Wipe dry.

20
IMG-451331
 

Lift the marked component up

 

Accessory installation

21
IMG-451696
 

Place the component where indicated in the graphic.

22
IMG-451702
 

Install the screw.


Tightening torque: M6 , 10 Nm

23
IMG-451345
 

Locate the pre-routed connectors.

24
IMG-451346
 

Connect the connectors.

 

Installation

25
 

Reinstall the removed parts in reverse order.

26
IMG-451717
 
27
IMG-451720
 
28
IMG-400006
 

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.