Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Removal

Remove the marked part.

Remove the weatherstrip.

Remove the marked part.

Fold marked part aside.

Remove the clips.

Remove the marked part.

Remove the marked part.

Remove the nut.

Tightening torque: Windshield wiper arm , 38 Nm

Remove the marked part.

Use special tool: T9814088, Puller

Repeat the steps when removing on opposite side.

Release the lock.

Remove the marked part.

Disconnect any connector(s).

Remove the clips.

Remove the screws.

Tightening torque: M6 , 10 Nm

Remove the marked part.

Remove the screws.

Tightening torque: M6 , 10 Nm

Disconnect the connector.

Remove the marked part.

Accessory installation

Install component that comes with the accessory kit.

Install the screw.

Connect the connector.

Reinstall the removed parts in reverse order.

Setting

Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.