Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC40 2019

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
307955921.231664783
Alarm, movement sensor




 
Equipment
IMG-345497
IMG-239667
IMG-242205

IMG-445700


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Color symbols

2
IMG-363036
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

 

Removal

3
IMG-441892
 

Note!
The graphic shows the back of the component before removal.

4
IMG-441754
 

Remove the part carefully

5
IMG-441726
 

Disconnect the connector.

Remove the marked part.

 

Accessory installation

6
IMG-445701
 

Install component that comes with the accessory kit.

Place the component where indicated in the graphic.

7
IMG-445702
 

Install component that comes with the accessory kit.

Ensure that all clips engage.

 

Installation

8
IMG-441743
 

Locate the pre-routed connector.

Connect the connectors.

9
IMG-441870
 

Install the marked component.

10
IMG-400006
 

Caution!
Movement sensor software application must be performed in two steps.

  1. Download software (application) for the accessory's function according to the service information in VIDA. See VIDA or the accessories catalogue for software part number.

  2. Install preparatory installation application

  3. Close / disconnect the vehicle tab in VIDA and reconnect. Make a new read out when prompted.

  4. Install movement sensor application.