Information

• Read through all of the instructions before starting installation.

• Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

• Ensure that all tools stated in the instructions are available before starting installation.

• Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

• In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Conditions

Color symbols

1. Used for focused component, the component with which you will do something.

2. Used as extra colors when you need to show or differentiate additional parts.

3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

4. Used when the component is not fully removed from the vehicle but only hung to the side.

5. Used for standard tools and special tools.

6. Used as background color for vehicle components.

Removal

Applies to vehicles with double end pipe

Locate relevant marking.

Use: Pipe cutter

Remove the screws.

Repeat on the other side.

Applies to vehicles with single end pipe

Use: Pipe cutter

Use: Pipe cutter

Accessory installation

Applies to vehicles with double end pipe

Repeat on the other side.

Install the screws.

Tightening torque: ,

Tighten the nuts.

Tightening torque: ,

All vehicles

Adjust to the specified value.

Repeat on the other side.

Tighten the nut.

Tightening torque: ,

Repeat on the other side.