2016 L.H.D

Installation Instruction

Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
XC90 2016
XC90 (16-) 2016

Instruction NoVersionPart. No.Click to download PDF-version of this Installation Instruction
322045411.032272983, 32272982
Tablet holder




Materials

Designation

Part number

Isopropanol

1161721


Equipment
A0000162
IMG-239664

IMG-463614

IMG-451967


 
 

Information

1
 

  • Read through all of the instructions before starting installation.

  • Notifications and warning texts are for your safety and to minimise the risk of something breaking during installation.

  • Ensure that all tools stated in the instructions are available before starting installation.

  • Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.

  • In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

 

Further information

2
 

There may be parts in the accessories kit that are not needed for this installation.

 

Color symbols

3
IMG-440436
 

Note!
This colour chart displays (in colour print and electronic version) the importance of the different colours used in the images of the method steps.

  1. Used for focused component, the component with which you will do something.

  2. Used as extra colors when you need to show or differentiate additional parts.

  3. Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.

  4. Used when the component is not fully removed from the vehicle but only hung to the side.

  5. Used for standard tools and special tools.

  6. Used as background color for vehicle components.

  7. Used for accessory components.

 

Removal

4
 

Note!
The removal steps may contain installation details.

5
IMG-394535
 
6
IMG-394500
 

Move marked component forward.

7
IMG-394038
 

Remove the screws.

8
IMG-394018
 

Note!
The graphic shows the back of the component before removal.

9
IMG-394039
 

Note!
Perform the procedure one side at a time.

10
IMG-462177
 

Remove the marked part.

11
IMG-399420
 
12
IMG-403590
 

The image shows seat without upholstery.

Release the locks.

Remove the marked part.

13
IMG-403751
 

Note!
The graphic shows the back of the component before removal.

14
IMG-464976
 

Remove the marked part.

15
IMG-463560
 

Release the locks.

Remove the marked detail/details.

16
IMG-463569
 
 

Accessory installation

17
IMG-463577
 

Install component that comes with the accessory kit.

A click confirms that the component is in the correct position.

18
IMG-463598
 

Assemble the components according to image.

Repeat the steps when installing accessories on opposite side.

19
IMG-463600
 

Note!
The image shows head restraint without cushion.

Check that the component has locked in its position.

20
IMG-463601
 

Pull the wiring harness through.

21
IMG-463602
 

Caution!
Check that the component has locked in its bottom position.

22
IMG-459273
 

Note!
Make sure that the backrest upholstery touches the head restraint, showing no space in between.

Compare with upholstery and head restraint on the other front seat.

23
IMG-459285
 

Note!
Make sure that the backrest upholstery touches the head restraint, showing no space in between.

Compare with upholstery and head restraint on the other front seat.

If adjustment is necessary, follow the procedure described in the method step below.

24
IMG-407341
 

Caution!
Press the foam padding upward against the upholstery.

25
IMG-454736
 

Note!
Orientation view

 

Applies when installing on right-hand seat.

26
IMG-462904
 

Install component that comes with the accessory kit.

27
IMG-462898
 

Note!
The component is installed angled inwards.

Install component that comes with the accessory kit.

28
IMG-462835
 

Place the cable tie as illustrated.

Connect the connectors.

29
IMG-463530
 

Connect the connector.

30
IMG-463536
 

Install component that comes with the accessory kit.

Connect the connectors.

Position/route the cable as illustrated.

31
IMG-463537
 

Note!
Place the cable tie as illustrated.

Position/route the cable as illustrated.

Tighten the cable tie.

 

Applies when installing on left-hand seat.

32
IMG-465042
 

Install component that comes with the accessory kit.

33
IMG-465044
 

Note!
The component is installed angled inwards.

Install component that comes with the accessory kit.

34
IMG-465045
 

Install component that comes with the accessory kit.

Connect the connectors.

35
IMG-465046
 

Connect the connector.

36
IMG-465048
 

Install component that comes with the accessory kit.

Connect the connectors.

37
IMG-465049
 

Note!
Place the cable tie as illustrated.

Position/route the cable as illustrated.

Tighten the cable tie.

 

On both sides.

38
IMG-383130
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

39
IMG-397249
 

Move marked component backwards.

40
IMG-383129
 

Remove the screws.


Tightening torque: Front seat to body , 40 Nm

41
IMG-383134
 

Fold marked part aside.

42
IMG-396605
 
  1. Release the connector's catch.

  2. Release the lock.

  3. Disconnect the connector.

43
IMG-396606
 

Unhook the cable harness clips.

44
IMG-403720
 

Remove the marked part.

Remove the screw.

45
IMG-465119
 

Lift marked component out.


Hint
This step may require the aid of another technician.

46
IMG-418918
 

Remove the marked part.

47
IMG-454620
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

48
IMG-454614
 

Reinstall the removed part.

49
IMG-459039
 

Route the wire adjacent to existing wirings.

Install the cable.

Use a cable tie

50
 

Repeat the steps when removing on opposite side.

Repeat the steps when installing accessories on opposite side.

 

Removal

51
IMG-456602
 

Remove the screws.

Fold marked part aside.


  1. Tightening torque: M6 , 10 Nm


  2. Tightening torque: M5 , 5 Nm

52
IMG-414411
 

Release the lock.

Remove the marked part.

53
IMG-422120
 

Caution!
Make sure that the seat backrest upholstery (fold down position) is not damaged by contact with the floor!

54
IMG-420368
 
55
IMG-414614
 

Remove the marked part.

Use hands only.

56
IMG-454915
 

Fold marked part aside.

Remove the screw.


Tightening torque: Seat belt guide, to Bracket , 4.4 Nm

57
IMG-415046
 
58
IMG-420370
 

Remove the panel.

Use hands only.

Fold marked part aside.

59
IMG-415048
 

Note!
The graphic shows the back of the component before removal.

60
IMG-414478
 

Release the catch.

Remove the marked part.

61
IMG-414482
 

Remove the panel.

Use hands only.

62
IMG-414483
 

Remove the panel.

Disconnect the connector, if applicable.

63
IMG-412242
 

Remove the panel.

Disconnect the connector, if applicable.

64
IMG-414575
 

Remove the panel.

65
IMG-390091
 

Disconnect the connector, if applicable.

66
IMG-414580
 

Remove the panel.

67
IMG-397280
 

Remove the marked part.

68
IMG-397244
 

Detach the panel.

69
IMG-397247
 

Remove the panel.

70
 

Repeat the steps when installing accessories on opposite side.

71
IMG-394779
 

Open the tailgate.

72
IMG-383039
 

Remove the marked part.

73
IMG-383043
 

Remove the marked part.

Remove the screw.

74
IMG-383044
 

Remove the panel.

75
IMG-383045
 

Remove the nut.

76
IMG-383046
 

Remove the panel.

77
IMG-383040
 

Remove the marked part.

78
IMG-394727
 

Remove the marked part.

 

Vehicles with seven seats

79
IMG-401374
 

Fold marked part aside.

80
IMG-424681
 

Note!
The graphic shows the back of the component before removal.

81
IMG-424606
 

Remove the marked part.

82
IMG-424602
 

Remove the screw.


Tightening torque: Safety belt lower anchor to body (rear) , 40 Nm

 

Applies to all other vehicles

83
IMG-383042
 

Remove the marked part.

 

All vehicles

84
IMG-383047
 

Note!
Do not loosen the bolts more than 2 turns.

85
IMG-383048
 

Remove the panel.

Check that the fasteners are undamaged before installation. If not, they must be replaced with new ones.

86
IMG-383066
 

Remove the marked part.

87
IMG-393945
 

Remove the screws.


Tightening torque: Cargo anchor, to body , 13 Nm

88
IMG-397295
 
89
IMG-383125
 

Remove the panel.

90
IMG-396625
 

Remove the screw.

 

Vehicles with air suspension

91
IMG-398660
 

Remove the marked part.

92
IMG-398661
 

Disconnect the connector.

 

All vehicles

93
IMG-383049
 

Remove the panel.

Disconnect any connector(s).

94
IMG-413025
 

Remove the screws.

Disconnect the connector, if applicable.

Remove the marked part.

95
IMG-459127
 

Install component that comes with the accessory kit.

96
IMG-446461
 

Clean the surface.

Use: 1161721, Isopropanol

97
IMG-446462
 

Note!
Press and apply pressure to the part over the tape for at least 20 seconds.

Install component that comes with the accessory kit.

98
IMG-446430
 

Clean the surface.

Use: 1161721, Isopropanol

99
IMG-446441
 

Note!
Press and apply pressure to the part over the tape for at least 20 seconds.

When installing Velcro tape the surface must maintain a temperature of at least +20 ° C (68°F).

100
IMG-457587
 

Install the marked component.

Install the cable.

Use a cable tie

101
IMG-451990
 

Position/route the cable as illustrated.

Install the cables.

Use a cable tie

 

Vehicles with towbar

102
IMG-451678
 

Disconnect the connector.

103
IMG-451683
 

Connect the connector.

104
IMG-451684
 

Connect the connectors.

 

Vehicles without tow hitch.

105
 

Locate the pre-routed connectors.

106
IMG-451761
 

Connect the connectors.

107
IMG-451766
 

Install the cables.

Use a cable tie

 

All vehicles

108
IMG-388358
 

Depress the locking device.

Remove the marked part.

109
IMG-388459
 

Release the locks.

110
IMG-388467
 

Fold marked part aside.

111
IMG-389347
 

Remove the marked part.

112
IMG-446581
 

Connect the cable.

113
IMG-446585
 

Position/route the cable as illustrated.

Install the cable.

Use a cable tie

114
IMG-389348
 

Reinstall the removed part.

115
IMG-388468
 

Reinstall the removed part.

116
IMG-446592
 

Install components that come with the accessory kit.

117
IMG-388631
 
118
IMG-388638
 

Remove the nut.

119
IMG-446557
 

Connect the ground cable.

Install the nut.


Tightening torque: M6 , 10 Nm

120
IMG-388633
 
 

Accessory installation

121
IMG-459479
 

Note!
Orientation view

122
IMG-448679
 

Position wire as illustrated.

Install the cables.

Use a cable tie

123
IMG-446557
 

Connect the ground cable.

Install the nut.


Tightening torque: M6 , 10 Nm

124
IMG-388633
 
125
IMG-459480
 

Remove the marked part.

126
IMG-454710
 

Release the lock.

Remove the marked part.

127
IMG-453168
 

Remove the marked part.

128
IMG-454916
 

Connect the cable.

129
IMG-454152
 

Reinstall the removed part.

130
IMG-459314
 

Reinstall the removed part.

Reinstall the clips.

131
IMG-459482
 

Reinstall the removed part.

132
IMG-459493
 

Position/route the cables as illustrated.

Install the cables.

Use a cable tie

133
IMG-388631
 
134
IMG-388638
 

Remove the nut.

135
IMG-446557
 

Connect the ground cable.

Install the nut.


Tightening torque: M6 , 10 Nm

136
IMG-388633
 
137
IMG-459531
 

Position/route the cable as illustrated.

Use a cable tie

138
IMG-459549
 

Position/route the cable as illustrated.

Use a cable tie

139
IMG-459258
 

Position/route the cable as illustrated.

Use a cable tie

140
IMG-459576
 
141
IMG-459578
 
142
IMG-465123
 

Install the marked component.


Hint
This step may require the aid of another technician.

143
IMG-454910
 

Connect the connectors.

144
IMG-459604
 
145
IMG-459606
 
146
IMG-459646
 
147
IMG-459271
 

Position/route the cable as illustrated.

Use a cable tie

148
IMG-465123
 

Install the marked component.


Hint
This step may require the aid of another technician.

149
IMG-454773
 

Connect the connectors.

 

Installation

150
 

Reinstall the removed parts in reverse order.

151
IMG-424469
 
152
IMG-424470
 

Check for correct operation.

Remove the marked part.